I have a post on this in the diesel section but wanted to ask a more general audience about head gaskets not sealing and what might be the cause.
I put a turbo on so I did all the head related preventative maintenance
The coolant overflow bottle is bubbling and water temps are trying to overheat upon driving.
The new head was decked, precups set at 0 protrusion, clean surfaces, MLS head gasket was used, multi stage torquing procedure from the center out,
maybe i used too much oil on the head bolts?
maybe should have used the copper gasket spray?
maybe somehow damaged the head gasket on install?
Any thoughts?
I put a turbo on so I did all the head related preventative maintenance
The coolant overflow bottle is bubbling and water temps are trying to overheat upon driving.
The new head was decked, precups set at 0 protrusion, clean surfaces, MLS head gasket was used, multi stage torquing procedure from the center out,
maybe i used too much oil on the head bolts?
maybe should have used the copper gasket spray?
maybe somehow damaged the head gasket on install?
Any thoughts?