350 exhaust (1 Viewer)

[madoc1]

i will probably get razzed for this , but i need some pics of a 350 to walker? crossover set up to the rear. under or over the skid plate? help is appreciated. jim

 

[ranger]

Like what Texican did here?
Tech contest Vee Eight Xhaust - Pirate4x4.Com Bulletin Board

 

[madoc1]

beautiful! tnx ranger. i am still unclear as to whether he put the pipe above or below the skid plate tho. jim

 

[rchandler]

Could have been up little higher but dont rock crawl. I had to modify the pipe in back to avoid gas fumes , extending and pointing down was the trick

 

[red65FJ40]

Here's some pics of what i did: 2" ram horns, walker crossover, Dynomax muffler, parts store 2" pipe to connect it all up.

The pipe is about level with the bottom of the main frame rail, i don't have a skid plate, so not sure if it would clear. If i did i think i'd want the exhaust pipe above the plate, and think it would be do-able.

I was happy with the way it all turned out, you can't see any of the exhaust system, except the tail pipe.

 

[red65FJ40]

one more pic of the rear area

 

[madoc1]

thx everyone. i have saved all the pics and will print them out to take to my local shop. good info! jim

 

[pbgbottle]

heres a few pics of mine in a thread from 2005 .still going strong with no leaks .could not get a walker y-pipe in canada

https://forum.ih8mud.com/40-55-series-tech/47645-ramhorn-single-exhaust-just-got-done.html

 

[4x4 Station Wagon]

Napa number 42087 Walker Crossover pipe - For anyone that is curious I just called my local napa and it is just over 70.00 for it....

Edit: - It looks like you can shop and get them under 50.00 then of course add shipping.