GA Architect
SILVER Star
- Location
- United States
The OEM part number for this rear harness replication is #82420-90318B. Note, due to the rear tail light female plugs being no longer available, I've left the wires unpinned at this time. This harness uses all 16ga wire and has an initial wrap of non-adhesive harness tape. The rear half has two extra protective layers; Tesa wire loom harness tape covered with a final wrap of silver electrical tape. Price: $210
For an extra $40 I can install a Sumitomo 4 pin (or 5 pin) waterproof connectors. But you will have to swap the male connectors of the rear combination lights. The gray waterproof seal below is the same size as the OEM seal, so you wouldn't have to cut & crimp any of the existing combination lamp wires.
Feel free to send a PM if you have any questions.
For an extra $40 I can install a Sumitomo 4 pin (or 5 pin) waterproof connectors. But you will have to swap the male connectors of the rear combination lights. The gray waterproof seal below is the same size as the OEM seal, so you wouldn't have to cut & crimp any of the existing combination lamp wires.
Feel free to send a PM if you have any questions.