2nd battery tray compressor fab (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 1, 2021
Threads
8
Messages
51
Location
Colorado
Wanted to mount my ARB twin compressor with the nice Slee mount but they are out of stock so I fabbed my own from my old 2nd battery mount.

PXL_20211105_020610105.jpg


PXL_20211105_020620162.jpg


PXL_20211105_021720416.jpg


PXL_20211105_041257966.jpg


PXL_20211105_123950231.jpg
 
Looks great 👍
 
Mount and compressor installed just need to plumb and wire. I know this is no big deal but I just got this Land Cruiser and this is the first bit of fabrication I've done other than bolt-on parts and kind of excited about that.

PXL_20211105_212553200.jpg


PXL_20211105_212559888.jpg
 
Nice, now make a jig, manufacture them and sell them. I would like one, might as well just tell me how much you'd sell it for. Jesus is it hard to find a pre-fabbed one now a days.

I could build one, but have less time them money.
 
Nice fab work-

Tip: If you're running 35" + tires and air up from 15psi to 35psi >> Get a good reinforced air line. The output air temp coming out of the twin compressor gets very hot- Ive witnessed it heat, & then soften the included ARB hoses enough that they burst. (or carry a splice or spare air line).
 
Nice fab work-

Tip: If you're running 35" + tires and air up from 15psi to 35psi >> Get a good reinforced air line. The output air temp coming out of the twin compressor gets very hot- Ive witnessed it heat, & then soften the included ARB hoses enough that they burst. (or carry a splice or spare air line).
Thanks for the tip. Would that still apply for less than 35" tires?
 
Maybe not-

it’s run time >> larger tires>> longer runtime >> hotter it gets. After airing up 4 x 37”tires, the first foot of hose coming off the compressor will be hot enough to burn- wear a glove
 

Users who are viewing this thread

Back
Top Bottom