2F RV cam/ Gear/ Lifters F/S

Joined
Apr 6, 2003
Messages
192
Location
Albuquerque, NM
RV cam, with cam gear mounted from my FJ60 2F. About 15k miles on all- with 'new' lifters, all for $100. Not a reground cam, lifters were OEM, not reground.
 
Joined
Oct 31, 2003
Messages
2,413
Location
Fischer, TX
Oops - for some reason I thought this was a head with this cam etc in it - it's not, so I'm not going to get it - not enough time/inclination for me to put it together and in.

Still sounds like a good deal for somebody looking for a little more out of their 2f with the time to do it...
 
Joined
Oct 1, 2006
Messages
3,984
Location
Sandia Park, NM
It's hard enough to find somebody with a 2F equipped truck. Among that small group, then you have to find someone with the motivation and time to do the work. Too bad they aren't OHC motors.
 

pappy

photosynthesizing
Moderator
Joined
Oct 7, 2003
Messages
11,499
Location
Too far north. Too far east.
Oops - for some reason I thought this was a head with this cam etc in it - it's not, so I'm not going to get it - not enough time/inclination for me to put it together and in.

Still sounds like a good deal for somebody looking for a little more out of their 2f with the time to do it...

Can't be that hard. A day in the garage. Lots to remove, but a good time to replace all the gaskets and seals on the front, top, and side of the motor and stop them leaks.
 
Joined
Jan 26, 2005
Messages
4,874
Location
in the garage
FYI the rv grind is a good power cam
i run one in my 78 2f
and at $100. you get a gr8 deal.

it's not a hard job to do either.
 
Joined
Apr 6, 2003
Messages
192
Location
Albuquerque, NM
Thnx, 2Bad. Yeah, it is a good deal. I was looking it all over and am tempted to put 'er in my 2F. Give me an excuse to paint/ seal the side cover.
 

Users who are viewing this thread

Top Bottom