2f rebuild kit ? (1 Viewer)

[srafj40]

Any suggestions on who to get a good rebuild kit from for the 2f?

Pulled the engine today and will be assessing the damage in the next few days.

Thanks in advance.

 

[watrob]

Here is one on ebay Australia for around $700AUD

http://cgi.ebay.com.au/TOYOTA-LANDC...ryZ10428QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

This store seller I have bought many times off.

 

[srafj40]

Here is one on ebay Australia for around $700AUD

With the US $ nowadays that is like $20,000 right.

 

[Degnol]

Let the machine shop source the pistons and install the cam bearings and freeze plugs. I got the rebuild gasket set from Toyota.


Ed

 

[watrob]

With the US $ nowadays that is like $20,000 right.

It's around $590 US.

 

[JustDave45]

For once I was smart enough to SEARCH before I posted. Any one else have ideas and sources ? I am gonna do the rebuild myself just send the block out for the machine work. I have done plenty of Fords but I cant seem to find kits for the Landcruiser. Any help would be great.

 

[Degnol]

Well, you don't know what pistons you need until the bores have been checked and most reputable machine shops want the actual pistons in-hand before they bore the holes, so I say let the machine shop source the pistons. They will run about $300/set. I also had the machine shop source and install the cam bearings.
If you need a cam, you can order that from any autoparts store....about $200
I bought new lifters from CCOT on sale for $100, "high quality Japanese" or you could have the old lifters surfaced.
For gaskets I would go OEM, contact CDan for best price.
As to a "kit", I would be leery of them because you don't know who made what.


Ed