- Joined
- Sep 22, 2018
- Threads
- 76
- Messages
- 1,004
- Location
- Noblesville, IN
- Website
- www.edmartintoyota.com
SOLD - custom build, posting because there are several cool new things on this one worth documenting (specifically dual light bars, 100% EXEL clear wrap, in-coil airbags, and customer inverter installation). Worth a watch! Build name hence the location of the new truck's home in southern Texas.
- Old Man Emu (OME) BP-51 Suspension
- 2703 Front Springs
- 2722 Rear Springs
- SPC Upper Control Arms
- Slee LC 200 Rock Sliders
- Rock Lights (three per side) wired to key fob / dome light circuit for use as puddle lights or rock lights with override in the SwitchPro
- Stock 2020 LC200 wheels powder coated Gloss black (five)
- ARB Summit 11" Drawers with duel sliding tops
- ARB JACK mounted in drawer with Quick Fists
- Trail Tailor - Lockable Tailgate Lid
- 1.25” Spidertrax Wheel Spacers
- Michelin LTX A/T2 LT275/70/18 (five)
- Long Range America 12.5-gallon long-range aux fuel tank
- Upgraded fuel lines, upgraded fittings, upgraded clamps, upgraded high-speed fuel pump
- Prinsu LC200 Full Roof Rack with 40” Lightbar wind fairing and noise reduction trim
- Light bar mounted in front
- Light bar mounted in rear
- Lights:
- Light bar front: Rigid Industries 40 SR-Midnight Edition
- Light bar rear: Rigid Industries 40 SR-Midnight Edition
- Custom drawer lights installed in tail gate (amber and white)
- Electronics:
- SDHQ Switch Pro 9100
- Redarc DCDC (BCDC1240) Custom mount attached to Slee dual battery mount
- Redarc Smart Isolator to link aux battery with primary crank battery
- Redarc Trailer brake controller
- Aux battery Optima Yellowtop Group 35 with Slee Group 35 Aux Tray
- Two (2) 4.8 amp USB ports
- Two (2) 12-volt outlets
- Two (2) 110v A/C outlets
- Underbody lights wired to dome
- Samlex 1000 watt pure sine inverter
- Escort Radar Detector 360ci max detector/jammer - fully integrated
- Anderson connector mounted underneath for Trailer winch
- On Board Air
- ARB Twin Air Compressor
- Airlift controller (Airlift compressor scrap)
- Manifold Kit
- Ball valve isolator
- Stainless steel air lines ran through frame for airbags
- Airbag Man "Firestone" In-Coil Airbags with Kevlar Sleeve
- Chrome Delete
- Gloss black paint with clear coat work for grille: headlight wings, lower fog light surrounds, lower door moldings, taillight trim, trim piece at base of upper lift-gate & rear emblems in black satin paint
- Black satin paint work over chrome strips at base of side windows and fog light bezels
- Paint Protection Film / Tint
- Front Two – XPEL Ceramic – 20%
- Rear Glass – XPEL Ceramic – 80%
- XPEL Ultimate Plus PPF – ENTIRE VEHICLE
- Ceramic Coat Gold over PPF