1hdt/h55 combo mated to 80 tranny? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 22, 2006
Threads
28
Messages
246
I searched but could not find a direct answer. Does anyone out there know if you can put a 1hdt/h55 transmission combo to an 80 series transfer case. Does it bolt in, do shafts line up? How hard is it to take a RHD transmission and convert it to LHD in an 80.

Thanks All

:cheers:
 
Hi dude ..

The BF1A it's pretty diferent than the HF1A or family that come in 80 series .. here in Panamá are some non common 70 that come with 1HZ engine ( same bolt pather than 1HD-T engine ) matted to a H55F and a BF1A t-case ..
 
swap in a part time t/case at the same time as the H55F and locking hubs... your fuel milage will love you, your front diff will love you...
 
So any recomendations on the correct part time transfer case for this swap?
 
How hard is it to take a RHD transmission and convert it to LHD in an 80.

No such thing as a LHD or RHD tranny, they are all the same!
 

Users who are viewing this thread

Back
Top Bottom