SOLD 1997 LX450 BUILT/FACTORY LOCKERS (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Year
1997
Vehicle Model
  1. LX450
Location
United States
Mileage
190000
Color
white
Ok folks, Not sure why Im doing this! Just trailered her out west for her last trip... We had a blast,
Best Toyota I have ever owned.... 28,000.00 OBO
All documents, original manuals,

PLEASE CALL ME IF YOU HAVE QUESTIONS! 256 759 0152

NOT INCLUDED
ROOF TOP TENT
HIGH LIFT



Details
Garage kept
SLEE LIFT- Details below
NEW 17' ICON wheels/ NEW 35" toyo mud terrains 90% tread left
Wheel spacers- can be removed- tires do not rub
aftermarket stereo and amp installed by previous owner
ARB front bumper
Slee Rear bumper
Slee sliders
Diff lock- Slee
Factory Lockers Front and Rear
Factory gears
Scan Gauge
WARN 9.5TI Winch - synthetic
3 row seats

Had new radiator and thermostat installed while in Colorado 2018- Proffitt's Resurrection installed
All new exterior window rubber installed by Troll Holes..cruisers
EXTRA DRIVE SHAFT INCLUDED





Lift installed in 2015 SLEE- Details Below


SLEE - 4" Front Coil Spring - Medium - PAIR
SLEE - 4" Rear Coil Spring - Medium - 80 Series Land Cruiser - PAIR SLEE - [4" Lift] - Remote Reservoir Shock. Front.
10.8" Stroke, 15.2" Com, 26" Ext. 14MM fixed pin top and bottom. - Requires SOF1279 Mount Kit. SLEE - Reservoir Shock Mount.
LH and RH Bracket and 4 Hose Clamps (2.75").
OME Steering Stabilizer SLEE - [4" Lift] - Piggyback Reservoir Shock. Rear.
10.8" Stroke, 15.67" Com, 26.5" Ext. 14mm Fixed pin top, eyelet bottom.
SLEE - Billet Front Control Arms - - 6" Lift - Coated, no bushings - PAIR Bushing - Control Arm - Front Axle
Bushing - Front - Lower Control Arm - Frame Side - 80 Series
SLEE - Rear Swaybar Drop Brackets - PAIR
SLEE - 2" Front Swaybar Drop Blocks - PAIR
SLEE - 2" Rear Bumpstop Drop Blocks - PAIR
SLEE - 2" Front Bumpstop Drop Pucks -- PAIR
SLEE - Front Adjustable Panhard Rod - Complete unit with new bushings. LHD
SLEE - Rear Panhard Rod - Adjustable -
ARB Adjustable Upper Control Arms -
SLEE - Front Double Cardan Shaft - Reconditioned hard parts with all new moving parts.
Brake Line Kit - Stainless - '93-'97 Land Cruiser (3 pc frame to axle kit)
Breather Extension Kit
Emergency Cable Bracket Spacer
KIT * SOF 4" Premium Lift Kit for 80 Series Land Cruiser

IMG_2884.jpg


IMG_2885.jpg


IMG_2886.jpg


IMG_2887.jpg


IMG_2888.jpg
 
Last edited:
Please call me for questions 256 759 0152
 
As far as the hood, I could call the previous owner! If I remember correctly it was a minor fender/bender... I bought this cruiser to build it and use it. That said, I will look for the vin tags on the hood for clarification. But I can assure you that the frame has not been touched/ damaged... This rig is probably the cleanest, straight, 97 "wheeled" 80 out there! Thank you for your input!


So here are the pics of the hood and quarters! All numbers match...





9C7C03DC-1FD5-40F7-B5EA-9724C8487C03.jpeg


474336B9-7D3E-4A6B-B5CF-E1CF68AA77C3.jpeg


12F056A5-2F42-4201-9C17-6DB73B460365.jpeg
 
Last edited:
Underneath pics and front end as well

3A4A7FF3-CBE0-48F6-8B29-37A1B23AA41F.jpeg


A81688A4-F9FD-4D87-962B-EA856ECFD5E1.jpeg


4B2FBB6C-50AA-4649-A024-972099FE362C.jpeg


26DEC5B1-8D80-4834-8F7E-6C1F5E0F4892.jpeg


60F2F087-FB1A-45D9-8203-AF69488B4096.jpeg
 
Monday morning bump... going to list on BAT or EBAY... make an offer!!
 
You can’t buy this clean of a locked 80 and build (as it sits) it and stay in the mid 20’s. If you’re that person wanting a turnkey truck (and have the budgeted funds) this seems like a great deal. Especially one with zero questionable areas and an owner that’s been into cruisers since at least 2007. Always my preference vs. an internet purchase from an unknown seller. Now if you’re a DIY’er you can possibly achieve this. I’m one in the later camp, but have friends that prefer “turnkey”. If I knew someone in the market at this time, I’d turn them onto your rig. Plus, I’m partial to NC as that’s where both my wife’s and my family are from :). GLWTS. Jimmy
 
Open to trades as well!
 
Beautiful Rig. I bought a LC from Todd in the past and his builds are sweet. Jump on this if you can!

Bump for fellow WNC LC junkie.
 
Beautiful Rig. I bought a LC from Todd in the past and his builds are sweet. Jump on this if you can!

Bump for fellow WNC LC junkie.

Do you still have the 97 40th?
 
Good luck with your current rig. It is very nice. I will be buying again in the next few weeks but still gathering $.
 
Most 80 series hoods have been repainted. Factory paint didn’t hold up well. I know Replaced bumper on a car fax isn’t ideal but believe it or not most of these 80’s have been in minor accidents and repaired with no car fax reports. I’m building a similar 80 and can tell you the slee stuff is 10k alone just in parts.
If I didn’t just start a new job job I would have paid the man already. It’s gonna go for 35-45k on a auction with the current demand. Just saying.
 
It's a really clean cruiser. I know this cruiser. The pics of the seats don't do them justice. They are a really nice chocolate leather. I know the owner and he takes care of his cruisers. This one especially.
 

Users who are viewing this thread

Back
Top Bottom