1995 HZJ80R diesel 1HZ air con compressor replacement (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 31, 2021
Threads
1
Messages
2
Location
Australia
I am about to replace the AC compressor on my 1995 HZJ80R diesel 1HZ. I am a bit confused as to which unit is suitable. My existing compressor is a Denso 10PA 15L and am looking at replacing it with a 10PA 15C as per link.


It appears the only differences is the upper hoses connection plate????
Would I simply bolt my existing hoses connection plate to the new compressor?
Attached photos of my existing unit.
Any help in this matter appreciated.
20210901_092922.jpg


20210827_143214.jpg
 
Yes move your existing top plate over.

Many top plates interchange, even from other models.

That is a steep price on that compressor, we can get remanned Denso’s over here for $200 and OEM out of the Middle East is about $500-600.

Cheers
 
Yes move your existing top plate over.

Many top plates interchange, even from other models.

That is a steep price on that compressor, we can get remanned Denso’s over here for $200 and OEM out of the Middle East is about $500-600.

Cheers
That quoted price is Australian dollars
 
Yes move your existing top plate over.

Many top plates interchange, even from other models.

That is a steep price on that compressor, we can get remanned Denso’s over here for $200 and OEM out of the Middle East is about $500-600.

Cheers

Your $500-600 equals about $700-850 Aussie pesos, plus 10% taxes
 
I am about to replace the AC compressor on my 1995 HZJ80R diesel 1HZ. I am a bit confused as to which unit is suitable. My existing compressor is a Denso 10PA 15L and am looking at replacing it with a 10PA 15C as per link.


It appears the only differences is the upper hoses connection plate????
Would I simply bolt my existing hoses connection plate to the new compressor?
Attached photos of my existing unit.
Any help in this matter appreciated.View attachment 2774194

View attachment 2774195

Looks like the clutch pulley snout may be a different offset.
1hz/1hd-t pulley offset is different to 1fz-fe.

They may just have a generic pic on the website, but worth asking.

It may be worth a search on ebay. There a few aussie sellers selling new OEM stuff at reasonable prices.

Or, check prices on Partsouq.com. They are hard to beat, and easy to order if you have a part number. Or use your VIN, and search diagrams for part number.
There is a backlog of orders at the moment, so delivery might be a around 2weeks from UAE
 
Your $500-600 equals about $700-850 Aussie pesos, plus 10% taxes

Yup

I just cross referenced a HDJ80 compressor today though, $185 on RockAuto, with the clutch.

Cheers
 

Users who are viewing this thread

Back
Top Bottom