I have the old booster out. Does anyone know if loosening the driver side engine mount is sufficient to give required space needed to pry engine over? Did you folks use a cherry picker or just a pry bar? Thanks!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
me tooI took the nut off the engine mount. Put a floor jack with a wood block under the oil pan. Then used a pry bar to help separate the engine mount.
I took the nut off the engine mount. Put a floor jack with a wood block under the oil pan. Then used a pry bar to help separate the engine mount.
[/QUOTE