Parting Out 1988 Toyota Land Cruiser fj62 (1 Viewer)

[4Cruisers]

Looking for the black hard plastic cap for the dashpot on the throttle body, or the entire dashpot assembly.

 

[EscapeWagon62]

Looking for tailgate lock cylinder WITH the attachment mechanisms for the power door lock actuator (I have the actuator)

 

[Dynosoar]

I am looking for a pair of exhaust flanges. I just need about 12" of the exhaust tube with the flange. For both of the manifolds. Price shipped to 93065.

Thanks

 

[cruiserjunktion]

View attachment 1611523 Looking for tailgate lock cylinder WITH the attachment mechanisms for the power door lock actuator (I have the actuator)

Sold

I am looking for a pair of exhaust flanges. I just need about 12" of the exhaust tube with the flange. For both of the manifolds. Price shipped to 93065.



Thanks

I’ll need to look at their condition and get back with you.

 

[cruiserjunktion]

I am looking for a pair of exhaust flanges. I just need about 12" of the exhaust tube with the flange. For both of the manifolds. Price shipped to 93065.

Thanks

Too rusted to remove

 

[Mater Stout]

Looking for the driver and passenger front seat belt receivers. Thanks

 

[cruiserjunktion]

Looking for the driver and passenger front seat belt receivers. Thanks

Plastic housing is cracked

 

[UGA2018]

Do you still have the distributor with vacuum advance?

 

[cruiserjunktion]

Do you still have the distributor with vacuum advance?

The 88-90 3fe has a different style distributor without vac advance. It uses a computer to regulate timing.

 

[UGA2018]

The 88-90 3fe has a different style distributor without vac advance. It uses a computer to regulate timing.

Thank you so much for the catch!

 

[the2zr]

I'm looking for the part circled in red...I'm a newb and don't know what it's called.

 

[IVAN DE LUCIA]

View attachment 1570684 View attachment 1570685 View attachment 1570686 View attachment 1570687 View attachment 1570688 1988 Toyota Land Cruiser fj62
for parts.

For fastest response, email or message for pics and prices.

HI

By any chance do you have the airbox / air system for the engine?

Thanks

 

[RodrigzCrzr]

Looking for a passenger lower chrome rocker moulding?
I actually need the ends on it?
Do you have?

 

[Mr Fusion]

Looking for a throttle cable and throttle pedal assembly if you have them.
Might also be interested in 4.10 3rds if available.
Thanks.

 

[IVAN DE LUCIA]

Hi, By any change the airbox system Do you still have it available?

 

[emac]

Looking for the tailgate carpet backing board if you have it. Thanks!

 

[Kirk Puuohau]

Looking for two gray rear head rests. Shipped to 96749. Thanks

 

[Samppahj]

Hi

Do you have this cover plate?

 

[LAMBCRUSHER]

Hey D, you got an fj62 or fj80 fuel pump mounting bracket/plumbing stalk? Also curious about an fj62 or fj80 cowl harness if you have one. Trying to cobble the rest of the bits for a 3FE into an fj55... Thanks!

 

[John McVicker]

Happen to have a harmonic balancer shipped to 93513?

Not sure, but I think they are the same on 2f/3fe.
Thanks, John