For Sale 1988 4Runner crawler PROJECT - winch, locker, SAS, 7mge engine swap, etc - Denver, CO (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Location
United States
For sale is a PROJECT 4Runner with lots of potential! This WAS running and driving before blowing the 22re engine, so the drivetrain and suspension are all installed and "tested". Is currently NOT running and will need to be towed.

The 7mge from a Toyota Supra has 199hp and 188ft-lbs of torque compared to the 112hp and 142ft-lbs of torque produced by the stock 22re. This will be a huge improvement in power while retaining Toyota reliability!


Features:
-Converted from IFS to a solid axle with 5.29 gears and Aussie locker
-7mge engine swap from Toyota Supra - needs completed but is installed
-Smittybilt XRC8 electric winch (almost new - only used to move 4Runner in driveway)
-Custom front winch bumper
-Rock sliders
-35" Goodyear MT/R tires with full size spare - more than 1/2 tread still
-High clearance fiberglass front fenders
-Additional trussing on the front axle
-Cross over high steering
-Vented front disc brake upgrade
-Front springs are 4 inch Trail Gear lift with longer shackles.
-Rear springs are Chevy 63" with longer shackles.
-U-bolt flip kit
-Bilstein shocks
-Reinforced raised front shock hoops
-Rear 2" receiver hitch
-Custom rear driveshaft with CV

Extras included:
-Grill is included (not pictured)
-Replacement headlights that utilize H4 bulbs
-ECU for manual transmission and automatic transmission included (wiring harness for automatic)
-Several manuals, wiring diagrams, etc for both the 7mge *Supra) and the 22re (4Runner)

What needs completed (list may not be complete):
-Radiator installed and hoses connected
-Wiring harness connected for 7mge
-Exhaust completed for engine swap
-Clutch master cylinder bled
-Driveshafts re-installed

Located in the Denver, CO metro area.

$5,300 cash only

IMG_1423.JPG


IMG_1424.JPG


IMG_1438.JPG


IMG_1439.JPG


IMG_1440.JPG
 
Last edited:

Users who are viewing this thread

Back
Top Bottom