I mentioned early, I have been horrible with the forums lately.
I will try and this up to date.
Work has been busy, hunting season, the surf is pumping etc...
Also, we got a camper for the full size, and its really comfortable with the wife and the dogs.
I have been slowly working on the 87 pickup, really didn't need much. For smaller trips and the daily driving, I would rather drive the 87 around than my F250.
I stripped the interior and sound deadened the whole truck.
I added a modern radio and put speakers in the door. I outsourced that work. I hate electrical. It's one of the few things i will not try and tackle myself.
Then I installed a thicker felt liner and carpet. I traded my bench for a reupholstered one. This has caused a problem. I didn't realize the 2wd drive and 4wd bench seats were different. This one is a 2wd seat the seating position is extremely low. I am now on the hunt for a 4wd drive bench.
Everything was running well.
Then the truck started running really rough, so I started to get into the engine. I redid the spark plugs, vacuum lines, a few other items, while I was in there.
We are all good once again.
I will try and this up to date.
Work has been busy, hunting season, the surf is pumping etc...
Also, we got a camper for the full size, and its really comfortable with the wife and the dogs.
I have been slowly working on the 87 pickup, really didn't need much. For smaller trips and the daily driving, I would rather drive the 87 around than my F250.
I stripped the interior and sound deadened the whole truck.
I added a modern radio and put speakers in the door. I outsourced that work. I hate electrical. It's one of the few things i will not try and tackle myself.
Then I installed a thicker felt liner and carpet. I traded my bench for a reupholstered one. This has caused a problem. I didn't realize the 2wd drive and 4wd bench seats were different. This one is a 2wd seat the seating position is extremely low. I am now on the hunt for a 4wd drive bench.
Everything was running well.
Then the truck started running really rough, so I started to get into the engine. I redid the spark plugs, vacuum lines, a few other items, while I was in there.
We are all good once again.