Does anyone know what the Blue wire with Bullet connector gos to that is on the turn signal switch wires?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
@ToyotaMatt do you know what the GW wire with the bullet connector in the picture I posted above is for. Wiring diagram shows horn (which is what I am trying to repair on my 9/75 FJ40) but I cannot find the female side under the dash. Does the female side need to connect to the horns? I will have to break open some wire bundles under the dash I guess. Thanks in advance!Believe that is the wire that came from the brake pedal switch when the turn signal and brake shared the same lamp. Didn't need to do anything to the switch when the tail light changed 9/73 except not use the wire.
9/72-9/77 used the same switch. 9/72-9/73 only had the single lamp for tail light, brake light and turn signal. Brake and turn signal shared the same element in the lamp. 9/77+ the turn signal switch changed so when you pulled the handle back the high beams on the headlights would come on. When you released the handle would spring back and headlights would be off.
@ToyotaMatt do you know what the GW wire with the bullet connector in the picture I posted above is for. Wiring diagram shows horn (which is what I am trying to repair on my 9/75 FJ40) but I cannot find the female side under the dash. Does the female side need to connect to the horns? I will have to break open some wire bundles under the dash I guess. Thanks in advance!