- Location
- United States
1968 & 1970 fj40 parts
All parts come from a 1968 and 1970 fj40. I have pics that I will email to ya, I can't figure out how to downsize them to make them all fit.
REPRICED SOME OF THE ITEMS. MAKE ME AN OFFER IF YOU HAVE ANOTHER PRICE IN MIND. THANKS
Front Headlight bezel with screen and bib, this is the whole set up for your front end. If you want something specific of the 3 let me know and we can talk price - askin 175.00 for the whole thing
Cowl with windshield frame and glove box door and knobs. Frame has section where PO put in a wiper motor, about 6 inches on the inside of the frame above driver is cut out on the inside for the motor. Cowl is in good shape. Only rust is at drivers feet where the cowl meets the floor board. There are no floor boards. The support at that point needs to be replaced but a very easy fix. Comes with the tranny hump, but it's not worth keeping. Reason I have it is cause I am using the bed on my 40. So it is in very good shape. 300.00 bucks
Stock Gas tank - has a small hole in the bottom...could be fixed - 25.00
Radiator - looks to never have been used...looks new, comes with the top hose attached. 75.00
Radiator "cover" - has some surface rust - 20.00
Roll Bar - had some surface rust, I sanded it down and put a coat of rustoleum on it - 75.00
Hood - make an offer, very good shape for a trail truck, but has some bondo in it...wouldn't recommend for a resto project..lol.
Fenders - R and L - Make an offer - Same as hood, very good for trail fenders to beat up. Has Bondo in them. I believe they do have the square fender lights still on them
Front heater - 25.00
1968 parts
Full Front Drum axle complete - I replaced the shoes and cylilnders...have less than a 100 miles on them since rebuild. Askin 200.00 bucks cause that's pretty much what the new cylinders and shoes cost. All OEM parts put back in it. - SPOKEN FOR
Front Bench seat - Drivers seat needs to be recovered - 125.00 OBO
Long rear seats - one side the support mount is broken, can be welded back on pretty easily - 50.00 a piece OBO
If ya see something ya like and wanna make an offer go for it. These aren't the ten commandments, the prices aren't set in stone. Would prefer pick up for the larger items. I'm in Clemson SC zip is 29631 for shipping.
Thanks a bunch, Chuck
All parts come from a 1968 and 1970 fj40. I have pics that I will email to ya, I can't figure out how to downsize them to make them all fit.
REPRICED SOME OF THE ITEMS. MAKE ME AN OFFER IF YOU HAVE ANOTHER PRICE IN MIND. THANKS
Front Headlight bezel with screen and bib, this is the whole set up for your front end. If you want something specific of the 3 let me know and we can talk price - askin 175.00 for the whole thing
Cowl with windshield frame and glove box door and knobs. Frame has section where PO put in a wiper motor, about 6 inches on the inside of the frame above driver is cut out on the inside for the motor. Cowl is in good shape. Only rust is at drivers feet where the cowl meets the floor board. There are no floor boards. The support at that point needs to be replaced but a very easy fix. Comes with the tranny hump, but it's not worth keeping. Reason I have it is cause I am using the bed on my 40. So it is in very good shape. 300.00 bucks
Stock Gas tank - has a small hole in the bottom...could be fixed - 25.00
Radiator - looks to never have been used...looks new, comes with the top hose attached. 75.00
Radiator "cover" - has some surface rust - 20.00
Roll Bar - had some surface rust, I sanded it down and put a coat of rustoleum on it - 75.00
Hood - make an offer, very good shape for a trail truck, but has some bondo in it...wouldn't recommend for a resto project..lol.
Fenders - R and L - Make an offer - Same as hood, very good for trail fenders to beat up. Has Bondo in them. I believe they do have the square fender lights still on them
Front heater - 25.00
1968 parts
Full Front Drum axle complete - I replaced the shoes and cylilnders...have less than a 100 miles on them since rebuild. Askin 200.00 bucks cause that's pretty much what the new cylinders and shoes cost. All OEM parts put back in it. - SPOKEN FOR
Front Bench seat - Drivers seat needs to be recovered - 125.00 OBO
Long rear seats - one side the support mount is broken, can be welded back on pretty easily - 50.00 a piece OBO
If ya see something ya like and wanna make an offer go for it. These aren't the ten commandments, the prices aren't set in stone. Would prefer pick up for the larger items. I'm in Clemson SC zip is 29631 for shipping.
Thanks a bunch, Chuck
Last edited: