1967 FJ40 preservation thread (#bigcityfj40) (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 30, 2015
Threads
95
Messages
573
Location
Houston, TX
I am now the very fortunate caretaker of an AZ 1967 FJ40. Will be lots more in the coming weeks/months. Need to take time and figure out just the small stuff. Some upgrades were done by PO who I am very thank for letting me care for this truck.

1. 4 spd
2. No single barrel, updated two barrel
3. Oil filter relocation
4. All rubber replaced, bushings also
Realizing how original this truck is, will be keeping as close to that as possible.

“Big City”

C1722B91-F2D4-47F0-B51C-65A78EDC716F.jpeg


BAC1F31B-EA51-4DE8-9D82-0036600E777A.jpeg
AD45048E-8A14-4331-8D43-31762C340FE4.jpeg
D8A684D2-711B-4170-BB54-C1B0D48AFC75.jpeg
45A21624-5F5C-4982-9236-594509D53136.jpeg
 
Last edited:
First things

drum brakes drag
Runs a bit rich
Filled with ethanol free already
Horn (relay or pin)
Adjust clutch fork, bleed (lots of pedal travel)
Flashed relay works, clicks but no lights (all other light functions are normal)
Oil change, fluid change

top off and drive.
E6AE6C38-F9C1-4D19-9C23-8FBA03395ED2.jpeg
04934C02-5054-48D8-9F76-AF6C38BE0FBD.jpeg


3BD4C66E-A9E0-4054-9244-579B0D4D5B28.jpeg
 
I am now the very fortunate caretaker of an AZ 1967 FJ40. Will be lots more in the coming weeks/months. Need to take time and figure out just the small stuff. Some upgrades were done by PO who I am very thank for letting me care for this truck.

1. 4 spd
2. No single barrel, updated two barrel
3. Oil filter relocation
4. All rubber replaced, bushings also
Realizing how original this truck is, will be keeping as close to that as possible.

“Big City”

View attachment 2646110

View attachment 2646111View attachment 2646112View attachment 2646113View attachment 2646114
this is a great find wish my 68 had been as complete as this. I wound up doing the resto mod thing and am happy with results.
this will be a great project. here is a pix of mine. dont hesitate to ask questions

20210414_110353.jpg
 
this is a great find wish my 68 had been as complete as this. I wound up doing the resto mod thing and am happy with results.
this will be a great project. here is a pix of mine. dont hesitate to ask questions

View attachment 2646245
Great looking truck! This one will stay as close to how she looks today as possible. I have a ‘76, lockers and 33’s for the mtns. Going to be a great process.
 
Great looking truck! This one will stay as close to how she looks today as possible. I have a ‘76, lockers and 33’s for the mtns. Going to be a great process.
I would definitely keep it like this, mine had been sitting in a field for 8 yrs and I was looking for a restoration project. Most of the mods are to the interior and driveline I went with original Paint colors

20161203_143957.jpg


20170417_110348.jpg
 
That’s a later model f engine early 70’s. Nice survivor, always fun to bring these back!
Whitey45,

yes it seems it is a early 70’s F. I looked at SOR and that’s good because I think I have a cracked exhaust manifold and the ‘67 and earlier are tough. Now to figure out the head and determine what exhaust manifold I need. Love these projects!
3C675EDC-AFDF-4127-B916-880D34B32960.jpeg
139B6988-184E-40F1-BF68-F1DC8112F474.jpeg
B6C9CCCF-60A3-4183-9EB7-9C850FB10CCF.jpeg
D75E6D0A-4A2F-4815-89B0-823AA7C6798B.png
 
B87FA224-3EF1-403A-8B74-EEAC2FB8FC6D.jpeg


39642D77-A5B4-4D64-A76E-06A39A552799.jpeg
 
Quick update

last night was an interesting one. Was able to back off the right front drums so no binding with drums on that side, changed oil, checked/adjusted timing and started to tune carb and found a cracked manifold, exhaust.

Good news is is a replacement block (looks like early 70) so the headed should be a bit easier to find than the early ones.
installed the Bog Filter in Big City, @HemiAlex

bled clutch fluid, adjust the clutch fork tonight. And new plugs.

67E66F69-C376-4B27-8EBE-5ACC0A785F23.jpeg
 
Late one tonight , adjusted clutch fork, new wire junction up front and plugs. Hope this rain stops so I can get proper warm up and check vitals.
08B0B73D-2E77-4CFB-B54F-AE0275797D8D.jpeg
CA72B653-2B7A-4D3F-904A-079F8A7F921E.jpeg
65006259-8615-4B93-ADF6-C236A668B793.jpeg
 
Interior pics. Put about 6-8 miles on her this am, rear diff seal didn’t like that!
2BCD575E-4EE1-4F42-8717-4F657BC81422.jpeg
757806CC-D995-448A-A2D9-EA478E96175C.jpeg
B3261BAA-46C5-479A-97D7-9F2330061493.jpeg
B3261BAA-46C5-479A-97D7-9F2330061493.jpeg
1C34A006-8C7D-4894-9B7C-106699796FA9.jpeg


81533F5C-D62F-46EB-88E0-E21831C3CB62.jpeg
 
@HemiAlex stopped by today. Great pictures he shared with me. Pinion seal done and some odds and ends. Need a day to do break work And pack front passenger side wheel bearing.

CFF31107-D8B5-48C2-9E7E-1A10BA4A4E4B.jpeg
EF3A3DBB-5F79-4216-8A6A-517C5A776756.jpeg
 
So cool... love the '67's! Mine was pretty original but no where near that nice when I got it 25 years ago, wish I kept it that way.
 
What part of Houston? I’m down in SE Houston, near Ellington.
 

Users who are viewing this thread

Back
Top Bottom