1965 fj40 parking brake (1 Viewer)

[Allingerb]

My book is telling me 160ft lbs for the rear output shaft nut, seems like lot for this nut. The nut also holds the parking brake mechanism on as well, just to help visualize. Does 160 ft lbs seems correct? Thank you

 

[Poser]

The backing plate/'parking brake mechanism' is retained by four 8x1.25 bolts that get secured to 11 foot-pounds

The castle nut and flat washer that retain the parking brake drum to the output shaft of the transfer case gets secured to 120 foot-pounds and retained by the cotter pin.

 

[Allingerb]

The backing plate/'parking brake mechanism' is retained by four 8x1.25 bolts that get secured to 11 foot-pounds

The castle nut and flat washer that retain the parking brake drum to the output shaft of the transfer case gets secured to 120 foot-pounds and retained by the cotter pin.

Thank you