12HT Bellhousing/Flywheel/Clutch/Starter question (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

2H / 12H-T and 2F are not all 10 splines .. ?

Is that a question or a statement???

I know the 1HZ splines are different. But if I am not mistaken the 2F and 12HT share a common input shaft to the transmission
 
Ok, I just found out that Exedy part number TYC540TF is a Safari Tuff clutch kit heavy duty.
The clutch kit in my H55 is only a month and a half old, so if I can I would like to reuse it. Am I mistaken in thinking the clutch and pressure plate will fit from the 2F to the 12HT????
 
Is that a question or a statement???

I'm positive my 2H / H55F combo use 10 spline 275mm clutch ...

I'm also positive 1HD-T - 1FZ-FE / H151 combo use 14 splines 300mm clutch and

I'm also positive 1HZ / H150 combo use 21 splines 275mm clutch
 
Ok Nob question but finishing my 12ht/h55f install in my fj60 and I wanted to replace the stock clutch and pressure plate. Where do I look for one and which one would be the best with mild tire upgrade.
 

Users who are viewing this thread

Back
Top Bottom