- Location
- United States
Hey yall-
I have a K&N 57-9021 FIPK Air Intake System and a Jet Performance 69144 Powr-Flo Mass Air Sensor which fit a 100 Series Land Cruiser. Both of these parts are new in the box and never used or installed. The K&N box has been opened, the Air Sensor box is still closed. I thought about installing this on my rig, but decided not to and can't return them now. K&N goes for about $340 retail, and the Air Sensor goes for about $150 retail. I'd be willing to sell both together for $300.
I am located on the north side of Atlanta, Georgia.
Full descriptions are below:
K&N 57-9021 FIPK air intake system:
K&N 57-9021 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Toyota Land Cruiser V8 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-9021 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor, and a replacement silicone EVAP canister vent hose, fuel pressure regulator vent hose and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, a ratchet set and several wrenches. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty.
Estimated Horsepower Gain 8.49 HP @ 4138 RPM
Air Filter Color Red
Air Filter Height 7 in (178 mm)
Air Filter Large End Diameter 6 in (152 mm)
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamp Material Stainless Steel
Clamp Style Regular
Clamps Included 4
Couplers Included 1
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Polyethylene
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
Product Style 57 Series FIPK
Replacement Filter RC-5100
Street Legal In All US States Yes
TUV Approved (Europe) No
Type Gen II
Weight 12.4 lb (5.7 kg)
Jet Performance 69144 Powr-Flo Mass Air Sensor
FEATURES:
I have a K&N 57-9021 FIPK Air Intake System and a Jet Performance 69144 Powr-Flo Mass Air Sensor which fit a 100 Series Land Cruiser. Both of these parts are new in the box and never used or installed. The K&N box has been opened, the Air Sensor box is still closed. I thought about installing this on my rig, but decided not to and can't return them now. K&N goes for about $340 retail, and the Air Sensor goes for about $150 retail. I'd be willing to sell both together for $300.
I am located on the north side of Atlanta, Georgia.
Full descriptions are below:
K&N 57-9021 FIPK air intake system:
K&N 57-9021 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Toyota Land Cruiser V8 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-9021 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor, and a replacement silicone EVAP canister vent hose, fuel pressure regulator vent hose and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, a ratchet set and several wrenches. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty.
- Guaranteed to increase horsepower
- Designed to improve throttle response and engine sound
- Lasts up to 100,000 miles before service is required (depending on driving conditions)
- Replaces entire factory air intake system
- Free-flowing high density polyethylene tube
- Easy to install, usually in 90 minutes or less
- Washable and reusable lifetime air filter
- K&N Million Mile Limited Warranty
Estimated Horsepower Gain 8.49 HP @ 4138 RPM
Air Filter Color Red
Air Filter Height 7 in (178 mm)
Air Filter Large End Diameter 6 in (152 mm)
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamp Material Stainless Steel
Clamp Style Regular
Clamps Included 4
Couplers Included 1
Intake Pipe Color / Finish Black
Intake Pipe Material High-Density Polyethylene
Product Box Height 12.5 in (318 mm)
Product Box Length 22.25 in (565 mm)
Product Box Width 14.25 in (362 mm)
Product Style 57 Series FIPK
Replacement Filter RC-5100
Street Legal In All US States Yes
TUV Approved (Europe) No
Type Gen II
Weight 12.4 lb (5.7 kg)
Jet Performance 69144 Powr-Flo Mass Air Sensor
FEATURES:
- Increase Horsepower And Low End Torque
- Improved Mileage
- Simple 10 Minute Installation
- No Other Vehicle Modifications Required
- Optimizes Cold Air Intakes
- Compatible With Other Aftermarket Upgrades
