'07 4.7 throwing codes (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 27, 2020
Threads
5
Messages
36
Location
South TX coast
2007 GX470, 80k miles, no service history until I boufht it last year. I did the tbelt, water pump, spark plugs based on age 4 k miles ago.
Cleared similar codes (but not all at the same time) a month or so back, replaced the gas cap...so that part's done.
Drove fine this morning, early afternoon the idle was rough, a miss, but not horrible.
Later there was a definite stumble off idle with moderate throttle and then the lights on the dash lit up. I pulled the codes when I got home, P0172 and 0175 were active and
P0300, P0306, P0308, P0172, P0175, P0101 were all 'pending'.

What to check first?
TIA,
Russ
 
It looks to me like this is a MAF caused issue.
I would start by cleaning the MAF.
The too rich condition is likely causing the misfires.
The p0101 is a code related directly to MAF voltage tolerance.
 
I cleared the codes, and drove it as normal the rest of the week, they haven't returned yet.
I'll clean the MAF this weekend and see what happens
Thanks
 

Users who are viewing this thread

Back
Top Bottom