hello all,
My front e-locker will not engage. I use them regularly and both axles have always quickly locked and unlocked. A week ago when I turned the lockers off the front would not unlock. I turned off the center diff lock and drove in circles forward and backward until it finally...
Ok so I found a scrap donor truck for my diesel 84 bj60 and wanted to ask if the following stuff would fit.
Donor is a 2f fj60 1983 4 speed manual on 33 inch tires
The bj is diesel 3b motor with a fj40 4speed transmission with one piece transfer or so I am told.
Here are the parts I want...
Hi Everyone, I'm new to the form and it's my first post. Im trying to figure out if the new 2016-2017 4Runner wheels will fit on my 1995 FJ80. Any information will be helpful. THanks in advance!
I've had a succession of problems withstarting. It cranks fine. When it fist did not start I let it sit overnight then tried carberator spray and it started right up. I changed fuel filter although there was no obvious gunk in filter. Then a week later it was idling and shut off. It was parked...
Looking to run the Enkei ST6 in 18 x 8.5 (+10 offset). Any thoughts on largest rubber I can clear? Originally wanted to go with a 315 but realize that just might not be in the cards given the offset...
Lift will be OME 2.5 inch or equivalent.
Here's a link to the wheels: ST6 | Enkei Wheels
Hey Everyone,
I sold my Land Cruiser last week fully intending to get into a Tacoma build, but plans have fizzled a bit due to prices being slightly insane so I've started looking at 3rd gen Runners for now. Aside from some outliers it seems like I should be able to nail one down for a...
This is the clearance between the front axle and bumpstop on my '76 resting on level ground. I think everything is stock. Looks tight, huh? It's maybe an inch, if that. I don't mind having an excuse to buy new parts :).
Hi, all! Will a front bumper from a '95 Land Cruiser fit on my '94?
My bumper has a bunch of paint chips, and I want it either painted or replaced. There's a bumper from a 1995 Land Cruiser for sale on Craigslist for $100. That would be WAY cheaper than re-painting mine.
Thank you!
Swapping in a full float axle this weekend along with chevy springs. Need to know if my diff with ARB will fit with no issues on a newer FZJ80 FF axle. Need to make sure splines on axles shafts from axle also match FJ62 diff splines....
Hi everyone. I'm the owner of a new-to-me 1996 Land Cruiser, which I am trying to piece back together. Some things were missing or broken, and one that I am a bit confused on is the correct part number for the rear mudguards.
In various searches, I have come across a few different part numbers...
I have read a bunch of threads and until Inactually do it I wont understand. Bought this axle locally will be at my house on Sunday. Can you help me understand what I will need to make this work on my stock 1970
Keep in mind this is my first experience with "birfs", boosters, and proportioning...
Totally random question, but if any of you guys are materials/ engineer guys, I would like to know if I cool my wheel bearing races in dry ice prior to dropping them in the hubs (as opposed to pounding them in), will it reduce their hardness after they come up to temperature? Also, will...
Disassembled for spring over, never got around to finishing project. Will ship individual components on your dime, backing plates are pretty well shot. $150 complete. $100 for 4.11 diff, $75 for both axle shafts. Located 1.5hrs south of Chicago.
Hi,
I have a 99 Land Cruiser and compared to my daily driver (2005 Acura TL) I absolutely hate the headlights. Once you get used to good HID's, going back to halogens is painful.
I am purchasing a TJM T-13 bull bar bumper in a couple weeks, and planned on putting some good lights in the...
I crawled under the cruiser to do some pre trip inspection and found a bunch of grease leaking from the birf. 3 weeks ago it looked fine, but now... My wife has been using it as her daily driver for less than 10 miles a day and we have been in the mountain snow a couple times since my last look...
I've been on the lookout for a drop down tailgate for my '70 FJ40, but those babies just don't seem to pop up on craigslist very often, and when they do...$$$$$. I found a nice looking gate from a '79, and I'm hoping it'll either fit or can be made to fit with a bit of hinge relocation work...
Up front, I promised I searched! I have an early 70 with pretty flat leaves which I believe are original. I'd like to replace the suspension and lift it, but I don't know how much it's currently sagging, and I'd like to make sure that it's still going to fit in my garage afterward.
It is...