Looking to sell my 1.25 inch wheel spacers. Will fit a 40-62 series axle with 6 x 139.7 (5.5) bolt pattern.
The center bore is 108mm and the studs are m12x1.5.
I got these from cruiser corps about a year ago. No longer need them.
New these are $106 for two
Looking to get $150 +shipping...
Is anyone running the Slee Spidertrax wheel spacers on factory 16” alloys and a 315/75/R16 tire? Car has a 3” Dobinsons lift and Slee 2” rear bumpstop drops and a 1-1/4” front bumpstop spacer (inside coil).
Was wondering if the tire would be hitting the factory fender flares at full flex.
Ordered last January, never taken out of box, brand new. Bought different wheels instead.
Shipping will be least expensive i can find between USPS, UPS and FEDEX, unless you want to pay more for rush.
4
Lexus LX570 (2008-2022) Spacers, 5x150 Bolt Pattern, 110 Hub. Aluminum, BORA...
Hey!
I have a 2000 Toyota Land Cruiser with stock rear springs, torsion bars, and shocks (x4); I live in Denver, CO and do a lot pavement driving, some offroad, and a lot of [pavement] snowing
So far, I have been given or acquired (but not yet installed any of):
-Sway-A-Way 32mm torsion bars...
I have a set of (2) aluminum 10 mm wheel spacers to fit the 200 series LC. I ran these so that I could use TRD centers to cover the grease caps up front with my Rock Warrior wheels without having to use larger adapters. These will fit without putting in longer studs. $40 plus shipping, and...
(4) 1.25" wheel spacers, fits 2008-2021 200 series Landcruiser, and the 2008- Sequoia and 2007- Tundra. These are used but in very good condition, includes all five lugs per spacer. I used them to bump my TRD Road Warrior wheels out a little to clear the hub and to clear my UCA's. Will sell...
I swear I’ve seen this on here some where’s, but not finding anything at the moment…
What high quality brand of wheel spacers do you trust? I have 6 lug and looking for 1.5 inches.
I’m not looking to start a wheel spacer debate. I’ve ran them fine for years with proper install and upkeep.
Changed wheels on my LC100 to the original stock look (dealer put chrome Lexuz wheels on it). The new ones are remanufactured and look like new but the front wheel center caps will not fit. Looks like the wheel doesn't have enough off-set. Did I not buy the right wheels?
This set was installed on a 200-series for a week. It pushed the wheels out and created some rubbing issues that I don’t care to treat.
$285 shipped for the set of four.
I have a set of 4 H&R Hubcentric DRM 25mm wheel spacers for 5x150mm bolt pattern. They show minor signs of age due to having been mounted for a couple years but are structurally sound and built to last a long, long time. These are perhaps lesser know than Bora or other manufacturers but H&R are...
I have a set of 4 H&R 25mm wheel spacers for 5x150mm bolt pattern. They show minor signs of age due to having been mounted for a couple years but are structurally sound and built to last a long, long time.
Available for pickup in or shipping from Medford, OR 97504. Sale price includes cost of...
I have a set of 4 H&R 25mm wheel spacers for 5x150mm bolt pattern. They show minor signs of age due to having been mounted for a couple years but are structurally sound and built to last a long, long time.
Available for pickup in or shipping from Medford, OR 97504. Sale price includes cost of...
I'm selling off a set of wheel spacers (1.5"- front & rear) for the 100 series land cruiser. 5 x 150mm bolt pattern - I believe they also fit some Tundra and Sequoia models but please do your own research. I'm not sure on the brand the previous owner put them on so assume ebay branded but to...
Set of 4 Bora 0.75" aluminum wheel spacers and hardware for Tundra/200 series. I ran these for about 2 weeks before deciding to get a set of new wheels instead. No issues, just installation marks from being torqued up. Your wheels will need to have pockets to clear the studs if you use these...
Set of 4 wheel spacers. Removed from FJ40. Great shape.
6x5.5 2” M14x1.5
Price: $50. Buyer pays shipping.
Can bring to Orange County if you are located down there.
I have four (2 pair) of 5X150mm, 1.0", 14mm Studs, Nitro Wheel Spacer (Pair) for a 98+ Land Cruiser & 07+ Tundra. Was mounted on my 98 Land Cruiser. $150 (shipping included).
Hi guys, I want to add some spacers to my FJ45 so the left tire don't rub against the steering mechanism when turning sharp right.
On this website they have spacers that are specific for the FJ45 but they are unavailable Wheel Spacer Pair - 1.25" -...