turn signal

Hello, this part is discontinued by the manufacturer. I own a KZJ78 and need a replacement for the socket behind the fog light. Does anyone have a new one or non-corroded working socket they are willing to sell? Thanks part no: 81515-60403 Wire Sub-Assy, Front Turn Signal Lamp Body...

Buying 60 Series flasher modules. Part numbers 81980-22070 (green) and 81980-16010 (black). Must be functioning and not have any melted plastic. I modify these for use with LED turn signal bulbs and ask people to return their existing unit to me. So far the success rate on that is about 25%...

Wanted to get a good set of USED Turn Signals. I know I can find OEM new, but prefer to have a nice patina set for my project.

Brand new. I ordered it thinking it would fit my 04 100 series, I need the version with large opening for the bulb. Oh well. $50 plus shipping.

I have a few take off parts from my 1990 HZJ73 All are pretty well used but thought they might be of some use to someone before I tossed them in storage, likely never to be seen again or contributed to the landfill someday. The steering wheel has some age/sun cracking and you can feel the...

Hi, Just get the new 2023 GX460 for one month 800 miles just noticed that the signal light (under the headlight) is jiggle arround, on both side is that normal?

As the title says, my tail/brake lights have started flashing when I turn on my turn signals. Doesn't matter whether its driver or passenger signal turned on, both drive and passenger tail/brake lights pulse with the turn signal. Also, my third brake light pulses, but only when the passenger...

Various years, pulled from parts rigs do may need a rebuild

Anybody need a patina lens, name your price. Some of them are after market. Or better yet, buy the whole lot cheap😁

So i decided not to run the large turn signals of the fenders of my 1976 40. I used Toyota original bib lights and modified them to work with he existing wiring. I put it up on you tube for easier upload. I hope it helps someone some day,

One of the turn signal lens covers on my 80 series ARB front bumper is cracked. I'd like to replace it but can't find any online. These are amber in color and I would be interested in buying a couple. Thanks!

I’m doing my best over the past few days to search for anything that may answer my question, but in the mean time, will post this here in case anyone has a quick suggestion. I’m replacing the front turn signals on my ’78 FJ40. Bought two new ones from SOR and have physically installed them, but...

after seeing some various folks asking another $50+ bucks for some retrofit bullet connectors , the cheap blue auto-zone kind ? it was the time to give the 1972 40 series crowd a shot at reality ...... The 9/71-9/72 one modle year only 84310-60023 SWITCH SUB. ASSY, TURN SIGNAL FJ40 , FJ45 ...

I broke the pedestal on my passenger side turn signal today trying to remove the rusty mounting nut. Anyone have a decent one laying around they're not using? Not concerned about the condition of the lens since I can swap mine over. Today's carnage...

Looking for the part that is held on the bottom of the turn signal switch by 2 screws. A photo of it will help also. Thanks, John

Reposting this here. Originally posted under Diesel section I have a question concerning a turn signal issue on my 24V - 1983 BJ40. The left rear turn signal does not work. The left side dash turn signal indicator works….although it flashes very fast, unlike the right side turn indicator which...

I have a question concerning a turn signal issue on my 24V - 1983 BJ40. The left rear turn signal does not work. The left side dash turn signal indicator works….although it flashes very fast, unlike the right side turn indicator which flashes normally. The 24V bulb is fine. I tried a new 24V...

1996 FZJ80. Guessing this works for all 80's. Part #8151560361. I need 2 of the pigtail wiring setups. I don't need the lens or housing. Please PM me if you have them. Thanks.

Pair for 20 plus ship

There is a split-second momentary flash from the dash turn signal when I turn on either heater or activate the high beam. Everything seems to function as it should, but I'm just wondering if I need to track this down. The only fairly recent change is I installed led bulbs in the dash lights...