Both of these have been shortened. The bar has been cut about an inch from its original length and the blade of the chisel has been ground down about 3/8”. $30 for the pair shipped to the US. Paypal F&F please.
Hi all, proud new owner of a '94 FZJ80 and excited to be here! Our truck needs a lot of love and i'm planning as doing as much of the work as i can within reason. I've got a relatively basic toolset acquired through working on various other cars and bikes, but i was curious to know if there were...
Don't do what I did!
Today, I was trying to see if I could plane some wood cookies that I cut the other day.
But I wanted to try something else besides using a planer (duh). So I put a carbide cutters disk on an angle grinder, rigged up a Unistrut frame with rolling bearings, and bolted the...
Pro-Tools 105, manual tube bender, with a protractor. Dies: 1.75”, 1”, 1-7/8” and 5/8” square. $650.00 It is currently set up to slide into a sleeve set in concrete. A plat will have to be welded on it if it is to be mounted to a floor.
JD2 Notchmaster Tubing notcher, 1.75” hole saw...
Pro-Tools 105, manual tube bender, with a protractor. Dies: 1.75”, 1”, 1-7/8” and 5/8” square. $650.00 It is currently set up to slide into a sleeve set in concrete. A plat will have to be welded on it if it is to be mounted to a floor.
JD2 Notchmaster Tubing notcher, 1.75” hole saw...
Pro-Tools 105, manual tube bender, with a protractor. Dies: 1.75”, 1”, 1-7/8” and 5/8” square. $650.00 It is currently set up to slide into a sleeve set in concrete. A plate will have to be welded on it if it is to be mounted to a floor.
JD2 Notchmaster Tubing notcher, 1.75” hole saw...
Pro-Tools 105, manual tube bender, with a protractor. Dies: 1.75”, 1”, 1-7/8” and 5/8” square. $650.00 It is currently set up to slide into a sleeve set in concrete. A plate will have to be welded on it if it is to be mounted to a floor.
JD2 Notchmaster Tubing notcher, 1.75” hole saw...
Just found those pliers. I have seen a lot of pliers, given I'm an antique myself, but had no idea what these were for. Look at the weird jaws. Had to look that up. It wasn't too hard to figure out, admittedly, thanks to Google, but I would not have guessed. Looks like I still need to...
Just bought an '03 LX470, and lo and behold, the jack tools were as missing as my 10mm socket. I looked around on ebay and people want a super premium for the actual tools. Any idea what the lug size is? Google wasn't as helpful as I'd like.
Thanks.
I have for sale a reproduction early style tool roll with tools. These were reproduced by member Tanker120 some years back. It’s a very nice quality reproduction filled with a combination of OEM and KTC tools.
$500 plus shipping.
Thanks
JP
I've replaced all the bushings and U-joints on my '94 FZJ80, and won't do it again for a decade or more. So the 4 press tools and press are available for $100 total. The jack does weep a bit of oil but works like new. It's a good deal, and I can give 10 minutes of tips if you like when you...
Gooday Gents,
Rebuilt engine project is coming to finishing point and ready to take it on the road. been using shop tools at work, and have 1 screwdriver to my name.
If anyone has some decent sets of wrenches / sockets breaker bar, hand tools etc etc up for sale I'd be interested.
And, if you...
Hey everyone I have been looking at consolidating my tools in my 80. I have been waiting for Red Dog Tools to release one for the 80. Has anyone used this for the 80 or any other vehicles? Seems like it could be a good big but I wanted to see if anyone has owned one...
If you live in Idaho or Oregon and need DeWalt tools, check out the annual D&B sale through 10/8. 40% off accessories, which includes hand tools, impact sockets, etc, and consumables (grinding/sanding/drilling/etc), clamps, etc.
There are also some standout deals like their 20V 1/2" hammer...
I’m looking for some input on if this makes sense from a safety standpoint and if it would even work.
I’ve started to take a 1 ton diesel to the mountains lately for hunting and camping while I’m other truck is a work in progress. The diesel isn’t really set up for off tossing so it’s nothing...
https://tools.woot.com/offers/yost-5-5-tradesman-series-industrial-grade-vise
$120
Not a bad deal for ductile iron. $207 on sale at Amazon and $400ish other places.
https://yostvises.com/products/55c-5-1-2-tradesman-combination-pipe-and-bench-vise-swivel-base