third member

Pulled my diffs to be regeared and locked. If anyone needs the factory parts coming out (non e-locked) feel free to make an offer. Came out of my 97 Lx450 with 270k on it. Had no problems with them before pulled

I was thinking maybe I would just grab a new 3rd member to setup new gears so I could do a quick swap, I noticed that Yukon has made a 8" RR High Pinion 3rd dropout housing. I see that it says: "Yukon heavy duty dropouts feature upgraded materials and a larger design than OEM to provide heavy...

Cleaning out more stuff from the garage. Have this 4.10 third member tag says came from the front axle of an 89 FJ62. Very good condition looks and feels great. These are strong thirds buy this one for $200. Buyer pays shipping. Best to email me shmukter@pa.metrocast.net

I have a factory front locker. Is the third member for the front diff the same on locked vs unlocked axles? I know the axle housing is different but I would like to know if I can swap in another complete third member. I want to keep my stock stuff and swap in a separate one with different gears...

I’ve come a long way since the last time I tore into a rear end. Let’s see how the progress is going with that ARB thing.

I recently tried to tighten up these loose fasteners (the nuts seemed to almost be unthreaded) at the bottom of my front differential. Now they are weeping gear oil. Are the nuts just screwed to studs that are threaded into the axle housing? Or are they some kind of special fastener? If I...

Looking for a FJ40 OEM Front Axle Differential - Third Member I can't believe how many of these i have given away or thrown away and now I need one. Hoping to find one in the San Diego area if possible. Pic for visual of what I am looking for.

SoCal Non Locker 4.10 gears - From a 1996 model with no leaks, no issues, complete with brakes and everything but the lug nuts. Two available $500 each. -----------------------------------------------------------------------------------------------------------------------

I’m am looking to for a set of FJ40 3rd members with 3.7 gears. Will be going in a 1972 FJ40.

Front diff out of a 95 FZJ80 unlocked with stock 4.10 gears still in good working order. $100 + shipping or local pick up. (Columbus GA) Matt

I have a locked third that was taken out of an 07 fj cruiser due to a bad pinion bearing with 170,xxx miles on it. toyots p/n is 41110-35b61, p/n shows that it is a 4.11 gearing and will fit a 07-09 fj cruiser and 08-09 4runner. it should also fit a third gen Tacoma as it is the 8 inch rear...

SoCal Prices run $50 to $100. Warn Hubs Birfields Steering Arms Inner Axle Shafts Knuckles Shipping available

Last night I dove into replacing my rear axle seals on my 74' FJ40 since my drum brakes were contaminated. I had helped a buddy once, but it has been years since then. I have a lunch box locker and got confused once I opened it up. Anyway, I inadvertently unbolted the 4 carrier bolts .... How...

i have a complete rear factory locked diff out of an 08 taco with 170,xxx miles on it. pinion bearing is no good and making noise, no play in the pinion, but there is noise. case is in good shape, gears look good, as far as i know the diff locker worked and it came out of a running truck. has...

Hello! Selling the complete third members from my '97 land cruiser. Factory e-lockers. Rebuilt less than 4,000 miles ago with Nitro 4.88 gear kit (full kit, not just the r&p) by Ramjet (reputable diff shop). They function perfectly! I have a line on some 5.29s, that I'll replace them with...

Selling a very nice 4.10 third member came from the front axle of an FJ62 that didn't look to have ever been wheeled. Good shape comes in a nice wooden carrying box. $125. Located northeast PA not far from I-80 and I-81. best to email me shmukter@pa.metrocast.net

I just wanted to know that to remove the rear third member do I just need to slide out both rear axles then just lift it out or are there other steps in the process. There are no lockers installed currently.

SOLD SOLD Selling a complete third member with a new Aussie locker installed. PO said it was never run and I believe it because the axle it was bolted in was not completely built and it looks really clean, has 4.10 gears. I got it with a project rig. Asking 300.00 for it plus shipping...

I have the stock 3rd member, and front axle housing removed from my 1993 FZJ80. Non locking diff, stock 4.11 gears. 220k at the time of removal with no known issues. I will be keeping the knuckles, steering arms, and birfs for now. I'm willing to split the set up if I need to. Looking for...

Moved thread to AXLE classifieds. Please see there. Hello! I'm considering selling the complete third members from my '97 land cruiser. Factory e-lockers. Rebuilt less than 4,000 miles ago with Nitro 4.88 gear kit (full kit, not just the r&p) by Ramjet (reputable diff shop). They function...