suspension lift

LOCAL ATTORNEY'S CAR, 2 OWNERS-SAME FAMILY, $12K IN MODS, OLD MAN EMU SUSPENSION LIFT, 4X4 LABS REAR BUMPER, SIDE SLIDERS, TMD FRONT BUMPER, 10K LB WINCH, LED LIGHT KIT, NEW HEADLIGHTS, WEATHER TECH MATS, SUNROOF, NAVIGATION, HEATED LEATHER, ROOF RACK, NEW TIMING BELT AND WATER PUMP, BUILT FOR...

Hi I’m a new member… my name is Ted H… And I’m addicted to my 4runner. Picked her up in NorCal 2 years ago, drove her home to NY and she’s treated me well. Had her undercarriage coated with fluid film to protect her from our salty roads. When I bought her she had a rough country spacer lift and...

Excited to offer 20% off for all our products on the site! Use code: BLACKFRIDAY23 at checkout to redeem your discount. Built with compression damping, a no questions asked warranty, and a progressive spring rate - check out the most advanced bolt-on bump stops on the market at: www.perryparts.com

First and foremost, thank you for existing. This site has helped me so much in the past 2 years. This site has rescued me more than I could count. That being said, I have just recently installed medium load (0-440lbs) ironman springs accompanies with ironman torsion bars and bilstein 5160s...

Just want to share this! After five months of waiting, i finally got these monster shock absorbers, the once in a blue moon shock absorber for 40 series (always unavailable) 😂😆 which includes foam cell steering damper came all the way from Australia to the philippines. Worth the wait😇😇 thanks...

I have a '72 FJ40 and I have been looking for the best combination of shackles, springs and shocks...and of course there is just an abundance of information out there. I am hoping we can get it narrowed down a little bit here. Here is what I want: 1. I want to run 33x10.50 tires 2. I want to...

I recently purchased a IRONMAN Foam Cell Pro 2" Lift kit for my 2014 Land Cruiser. The rear springs were designed for more of a constant load and actually lifted the rear of my truck 3" instead of the advertised 2" of lift. I will never install a heavy after market rear bumper or cargo boxes...

Beefy 2" Nitro Gas FJ Cruiser lift kits are on sale until this Sunday, Sept. 15! $699 FJ Cruiser 2" Nitro Gas Kit

Step by step guide on how to install the Ironman 4x4 Foam Cell Pro suspension kit on your Toyota Tacoma. Get your Ironman 4x4 Foam Cell Pro Suspension Kit - ...

Originally developed for the Australian military, our Foam Cell Pro line of coil overs and shocks are the strongest and best performing option on the market....

NITROGEN GAS PRESSURIZED - Low pressure nitrogen gas dramatically reduces the likelihood of oil aeration and shock fade. 35mm TEFLON BANDED PISTON - Precision shim-stack piston specifically valved by Ironman suspension engineers, banded with teflon for smooth long life operation. 54mm TWIN TUBE BODY

I finally got what I thought was all the parts needed for my 3.5:F - 3"R Dobinson's install and 37s, but now having an issue that I need some direction on. The steering arm (I think that's the proper name) is hitting the radius arms on both sides. Can anyone offer a solution? It's severely...

I recently had Slee 30mm rear spacers put in. They were installed by my "normal" mechanic. (just a NAPA guy). All looked good and road well at speed. BUT going slow over bumps it feels TERRIBLE; even small ones. It feels like they are not attached to the frame, makes a knocking sounds and...

I know this has been covered many times but I just wanted to get current opinions on where I ended up with my suspension decision. I'm currently at just under 100k on my 08 200 and am finally ready to upgrade from the stock suspension. I have young kids so most almost all of my offroad...

For sale is a complete stock AHC suspension taken off a 1999 Lexus LX470. Shocks, springs, and torsion bars, Hydraulic Pump, Accumulators, AHC controller and switch. I also have some of the hydraulic fluid lines. AHC system was working good when it was removes, was well maintained. Located in...

For sale is a complete stock AHC suspension taken off a 1999 Lexus LX470. Shocks, springs, and torsion bars, Hydraulic Pump, Accumulators, AHC controller and switch. I also have some of the hydraulic fluid lines. AHC system was working good when it was removes, was well maintained. Located in...

These Front Coil Overs from King Off-Road Racing were put on the truck strictly for fitment purposes. The vehicle did not touch the ground with the shocks installed. They are brand new out of the box, and will ship in their original packaging. King Part Number: 25001-266A - OEM Performance...

Hi Guys, I bought a 2005 Land Cruiser a few months ago. The rig has 170,000 miles. I need to do something with the suspension... I am up here in the Lakes Region of New Hampshire and the most off road its going to go on are some forest trails/fire trails and light camping. No rocks at all. I...

***SOLD*** This is a new, never installed, still in the packaging Old Man Emu medium kit for a 2nd generation Tacoma, 2005 - 2015. It provides 2 - 2.5" of lift, suited for trucks with an extra 100 - 200 lbs in the front (winch bumper) and no extra weight/stock capacity in the rear or some extra...

Hi all, the title pretty much sums it up. I'm going to do the lift kit install on my car my self and just wanted any advice, tips, warnings or things I should know before I start. The kit gives 50mm lift and includes the springs, shocks, bushes and U bolts. I've decided against getting...