specs

The "download details" function for a 1958 build provides some new specs, per below and at the build link: https://www.toyota.com/configurator/build/step/summary/year/2024/series/landcruiser/model/6165/exteriorcolor/0040/interiorcolor/FB20/?bap_guid=02e4d2b2-5d71-46ba-9128-746a52df2549 Payload...

Hi folks, time to service my 40-Series and, after a long pause, bring it back to the road again... I changed the gear box oil: according to the owner's manual the specs are API GL-4 or 5 and viscosity SAE 90. Went to my local parts shop and they gave me this gear oil: specs GL-5 and viscosity...

Anyone confirm the offset and backspacing for these wheels there Oem 15x7 off my 1992 land cruiser Trying to find some 15x8 or 17x9 aftermarket wheels with similar specs as Im currently running 35 12.5x15 and its hard to find someone that will mount new 35’s on 7”wide wheels most places say...

I am replacing the clutch in my 1970 FJ-40 3-speed. I took the flywheel to a shop to have it resurfaced. He did not have any specific specs to go by, but simply took the same amount off both of the step surfaces. The difference between the two surfaces is .755. Does anyone know if this is within...

Does anyone know the resistance ranges (ohms) for the water temp, oil pressure and fuel level sensors? I want to bench test a wiring harness I just fabricated for my ‘76 FJ40.

Lexus has released their official Pricing and Specs for the GX550, the twin LC250 should share many of the specs, but at a lower price point. https://pressroom.lexus.com/a-new-legend-is-born-the-all-new-2024-lexus-gx/ GX550 Specs...

Team, I am in process of rebuilding my 5/77 2F transfer case rear output seal and e-brake components. I do not have a FSM handy, was hoping you can help here (see pic). Also, here are the callouts: 1. Rear u joint bolts (4) torque spec 2. Output shaft stake nut (1) torque spec 3. Front u...

The 14B-T is maybe my favourite B engine and during much internet trawling, I finally came up with some official-looking specs. It comes from a Taiwanese customs website, looks to be an official document for import/registration in Taiwan. The 14B-T was mostly sold in Japan in 24V Dyna/Toyoace...

What are the specs on the rear differential for a LJ79 and how does it compare/swap with what’s on the 80 series? There’s a sweet looking 79 local-ish but the issues is a busted rear diff due to fluid loss. Says the gears are toast. I have a complete 3rd member for a 9.5” with an e locker for...

I have 2 batteries connected parallel for a 12 volt set up. I am told my batteries are bad. Since I need to replace them, what is the proper battery specifications for a 12th engine? Thank you

I'm replacing my '94 exhaust with a '95-97 style from the manifolds back, but only one cat (and that is attached to the downpipe). I have the parts in hand except I need to weld up a spacer to replace the second cat. To make a spacer I need to grab some tubing (2-1/4"?) and two flanges. Anyone...

Hi all 2008 HZJ71 1HZ LHD , someone know the tie rod lenght ? should be approximately 1184,00 or 1203,00 mm ? thank you Giacomo

Trying to reinstall everything from the transfer case to the front wheels. I've had virtually no success finding torque specs for the GX470 specifically. I'm convinced I'm looking in the wrong places because I cannot find this information anywhere and I cannot be the only person to ever ask...

I've decided to ditch the spacers the stealership installed when I had my lift installed. Currently running the BBS Forged/TRD Pro wheels (18") and 305/65 BFG's with a SpiderTrax 1.25" spacer. If I wanted to find (or order) a correctly backspaced wheel to get rid of the spacers, what specs am I...

Toyota Australia officially launched the 300 on their website. Here are links to the specifications and brochure. In the latter, there’s a page with Toyota-approved accessories including bull bars, roof rack, etc. Still haven’t seen interior measurements anywhere.

I’m looking to put a drawer system into my 200. Until I can afford a fridge, I will use my Yeti on the sliding platform. But an empty yeti cooler is monstrously heavy and once filled with food and ice, it’s practically immobile. So I worry about if a sliding platform can hold that weight...

As the title suggests, does anyone have the factory shock length for the front and rear? I tried the search bar but could only find results for aftermarket shocks. Edit: By shock length, I mean the stroke length.

Timing Gear Oiler Angle

Hey all, could someone tell me the overall exterior length (nose to tail) of an LJ 70 and an LJ 73? I'm trying to figure out if I can fit a potential new purchase in a shipping container with another vehicle... or 2. 4x4 tetris, if you will. If you have an aftermarket bumper on yours when you...

I was looking at Hino home site ,it has a list of their various diesel engines from 4 litre to 12 litre. I thought the J05 5.1 litre 4 cyl might work in a landcruiser. All of their engines are available in a non emission certified versions. Diesel Engines | Products | HINO GLOBAL Their Dakar...