socket

Hello, I've been reading the EWD for a while and searching past threads but unable to connect the dots to what I see under my 80. None of what I see matches the wire colors in the EWD. Can anyone tell me if either of these connectors is from the factory? I need to clean this up so I can...

Hey guys ! First post here, I’m redoing my breaks and having some serious issues getting off the spindle nuts. If anybody is local between San Diego to Hemet and could loan me the 54mm spindle socket/ or a hand I’ll gladly reimburse with a case of beer.

I need a Bulb Socket for instrument cluster bright light indicator 1965 LPB. Possibly FJ40 and other applications will work. Do you have an old wiring harness around? I do but of course it is missing this section. Wire that goes to bulb socket is red. Bulb goes in socket and turns and then...

I need a Bulb Socket for instrument cluster bright light indicator 1965 LPB. Possibly FJ40 and other applications will work. Do you have an old wiring harness around? I do but of course it is missing this section. Wire that goes to bulb socket is red. Bulb goes in socket and turns and then...

I'm pretty sure this valve is 32mm but I can't get any sort of torque on it without it slipping. Does anyone have any tips on how best to get this off? I have no clue if it matters but it seems like there are two different types with different part numbers. I have a 2007 if it makes any...

Can’t find the right size oil filter socket at local autozone, what size will work on factory filter? Thanks in advance.

I need the one that's circled. Previous owner soldered the bulb directly to the power wires. I'd be eternally grateful for a source, a part number, or an offer to sell me your spare. I've looked on Amazon, eBay, and Aliexpress, and can't find anything that seems to fit. Many thanks.

Hi, I'm deep in the middle of a rewire of my 100 and need to replace several female contacts that are used in junctions. This is an example of one of the junctions: And this is the socket contact I'm after: I've checked a few Toyota manuals and can't seen to make any headway. I have...

Hi everyone, I am moving this month and finally have a two car Garage! I just received purchased a huge tool cabinet that is pretty much empty. I need to fill it up. What is the best quality brand for sockets and wrenches. I have tons of cheep random tools in my 80 for emergency wrenching but...

Anyone in or near Conway that owns one I could borrow for the afternoon? Repacking my front bearings and would like to use the correct tool rather than go completely shade tree. Thnx!

After Death Valley Overland this time last year, I found that I have little use for a cigarette lighter plug in the dash (*being a non-smoker!), and a real use for USB connectors there. Having borrowed a retrofit plug-in USB adaptor from @1Louder , it worked, but the sad state of my cigarette...

Quick post in case anyone does a search...no sense in everybody shelling out the $$ for a one-time project (rotors/axle etc). Just bought one and happy to share. PM if you want to borrow.

Due to an ebay bidding error I ended up with two 46mm sockets. This is the size for the harmonic balancer/crank nut on the F/2F/?F etc. $20 takes it, that's less than what I paid. It's new old stock in the box. Nice made in USA tool. 3/4" drive.

Hey guys! I was wondering if one of you would be able to rent me a 54 mm socket and breaker bar? for taking off the locking nuts within my 1982 bj60 front hub! also if anyone has any extra snap clips (to keep my axle in my birfield joint) I'd be happy to buy them off you! preferably by March...

I love tools. I love collecting tools, using good tools, cleaning tools, looking at tools, anything with tools. I think we should have a thread to pay tribute to the awesomeness of tools by posting tool recommendations, tool reviews, funny tool stories, how you used a tool for something other...