I completed my rebuild and have a few things left over that might help someone else.
Upper left fender - OEM - $200 plus shipping
Front right turn signal black - $50 plus shipping
Front left turn signal chrome - $50 plus shipping
I came across a thread the other day about a part called Ultra Power TW35 from rock auto. I looked up the part and its only 25 bucks so I ordered one to check out and heres some notes from it.
This is a link to the part, its from an early toyota pickup
So the way the combination switch works...
1981 BJ41 24v volt system
With the rear tail lights removed, should the front turn signals still operate when engaged?
My parking lights will come on, but the turn signals will not blink.
I'm 6000 miles away from the rig currently, so of anyone knows if you need the rear lights installed to...
I popped out my turn signals to give them a nice polish and found a set of wires that were cut and attached to the righ turn signal harness connector. Any idea as to where these go?
Over the last several weeks I've had a problem with my turn signals and hazards not working. One day they would work fine, and then mid cruising around, they would stop working for a couple days. Then the truck would sit for the weekend, and everything would be back to working as intended. Then...
Hi all - Was checking my signals before my state inspection next week. Turn signals were working just fine on several occasions. I then tested the harzards - they worked fine. However, when I tried the turn signals following that, no dice. No noise, no turn signals on either side, no lighted...
Any one know of a source of turn signals for a custom bumper that use factory toyota plugs?
Or plugs with a pigtail at least?
I need to find a pigtail/turn signal that plugs into the truck side plug, pn# 90980-11091.
SOLD SOLD SOLD
Good condition stock fog lights and turn signals removed from my 2006 LX470.
Price: $150 + Actual shipping cost (local pickup okay)
Location: [MD] 20771 or 20878
Paypal okay.
Please read entire ad before expressing interest.
I bought a new aftermarket switch for my 60. Worked perfectly BUT the harness was short. Seems I got shipped the wrong one. Same harness but about 6 inches too short.
Not sure which truck it was actually meant for.
Best offer
Got these for my 76 FJ40 but am going tube fenders and custom rear bumper so these won't fit my need.
Tail lights were 70 each new, I'll sell the pair for 100. Turn signals were 80 each, I'll sell the pair for 110.
I have a trailer (M416) lights issue and am at a loss how to resolve it.
When hooked up to my FJ-60, 7blade RV to a 4 pin trailer using an adapter I do not get any turn signals.
When the trailer is hooked up to another vehicle, 4pin to 4 pin the trailer lights work perfectly.
When my FJ-60 is...
Hello,
I am new here. First post.
Signals and hazard lights on my 1971 fj40 stopped working both at the same time. Turned out to be 2 seperate problems simultaneously. Figured I would post this up just in case it could help somebody else out and save some time.
My wiring appears to be stock...