A442F from my 93 FZJ80. Rebuilt by a 40 year transmission shop owner in my town. New clutches and converter. I have $2000 just in parts and labor. Trans is priced to move at $1500. Located in central Ohio. Pick up, can ship on buyers coin via fastenall.
Thanks.
I've heard Bearden and Landcruiser specialists recommended for land cruiser work in Austin.
If I need my 82 fj60 transfer case rebuilt (front output bearing is shot) who is the right choice in town?
should I go with a trans rebuilder?
My mobile mechanic doesn't do that sort of thing.
What...
1HDT Completely Rebuilt $12,500
Cold start compression numbers: 450 all cylinders. 490 at operating temperature.
What does a rebuild mean?
See this rebuilt, parts, original and new!
Starting in our test rig
Gauge readings and running in test rig before crating
Have rebuilt A442F as well...
Completely rebuilt 2H diesel in the works. $8500. Track the project on our website.
https://www.legendarytoyota4x4s.com/projects/2h-rebuild
What does a rebuild entail?
https://www.legendarytoyota4x4s.com/engine-rebuild
Can add a whistle and soot turbo set up...
Pick up only (you arrange).
$3.5k - Rebuilt 1FZFE with all yota parts except in a few places (cometic gasket, ARB head studs, and crank bearings are mahle, water pump is probably AISIN, oil pump cover has SS torx screws). Machine work done at Mt High Performance in Arvada, CO (the machine...
I am in the process of building out my TLC and my son has decided he wants one too. We found one one with a rebuilt title. I ran the carfax and it showed flood damage in September 2008 (Hurricane Ike) with subsequent work later that month from a Toyota dealership. It had about 160K miles on...
Rebuilt with new guides, seats and plugs. Ready to go. Selling b/c I got the engine to rebuild but found out it had a cracked block.
$650 and buyer pays shipping, CONUS only
Perfect for an upgrade to a 40 series - especially if you swapped in a transfer case without a parking brake!
I'm selling a 70 series FF, disc brake (with parking brake & cable) non-locked rear axle that was originally in a 90-97 HJZ73. It has been rebuilt with all OEM parts (rotors, calipers...
Rebuilt A442F with new converter
Work done by local transmission shop owner with 40 years experience. I have $2000 in it. I’ll take $1500 to IH8mud member or tlca member. Located in central Ohio.
Any 2h injector pump gurus out there?
I’ve got a freshly rebuilt 2h with a freshly rebuilt injector pump and injectors.
My issue is that it’s just pumping out black smoke at all rev ranges, especially at idle. I can wind in the fuel screw till there’s almost no threads left and it barely...
Back when I first got Internet in 2003, I picked up this jewel (along with about a dozen others) from guys that had taken their stock carbs off back in the day for the ‘power pack’ aftermarket setups that were being sold when the rigs were new. Most of these guys ‘found’ their OE carburetors...
Hey all,
I've got a 2003 LC that I've owned for the last 5 years and am the second owner. It has 270k+ miles on it. It's been fantastic for 4.5 of those years but the last 6 months have been real tough for it.
A little over 3 months ago I was driving home from work when I noticed a clunk...
Someone left a voicemail yesterday looking for a 60205 carburetor. I just happened to finish a rebuild restomod on one last week, and I said I would post pics.
As you can see, the carburetor has been fully detailed to return as much luster as possible to the original zinc plating, ported for...
As I continue to slowly work my way through my inventory, I have rebuilt another early Landcruiser carburetor. This one features a custom replacement sight glass with the Aisan logo script etched into the glass. I paid to have a batch of these made as an affordable alternative to service my...
Selling my Warn 8274 rebuilt Winch.. I removed it from my FJ55 because I never used it.. The truck is a starbucks queen.. No mud..
I have receipts for the Winch Motor from Garry;s Automotive along w bearings and smalls needed to rebuild it... Comes w cables and original remote... $1850.00
All...
This posting is for a long block only. so valve cover to oil pans no accessories. The block has been hot tanked then machined for flatness. Bored .50 over OEM pistons and rings will be installed. New OEM bearings on the rods and crank. The head has been cleaned and checked for cracks. Three way...