Sequoia Gen2 1.75" Rear Coils - Dobinsons C59-477 - $350 - Local pickup, 93063 Simi Valley. Will deliver or meet 1/2 way (within reason) or ship UPS ground at buyer's expense
Hey guys sorry might be a very noob question but i’m having a som shocks getting built for me by a manufacturer and they claim the front struts will have 5.7 inches of travel. Is that considered long travel already? or will i be in the clear with just getting some adjustable ucas
I'm ready for a new lift on my 40. I'm at least ready to get new shocks but don't want to spend money just shocks if I'm gonna soon switch the springs. Previous owner had a lift from SOR installed a couple years before I bought it. About 10 to 12 years ago. I think it's a 2.5 inch but I'm not...
Hello Mudmates,
After adjusting my ACH sensors for max lift, I was not quite done with the work. I decided to modify the arms to achieve more lift. I originally lengthened them as i thought i saw someone else do this. (I should have paid more attention) After cutting them and using a section of...
Alright all you 4Runner enthusiasts. I installed a rough country 2.5 inch lift a little over a year ago. I ended up struggling with bad camber. I maxed it out and still has tremendous positive camber so I installed a diff drop, built cv axles for a lift, new tie rods, lifted control arms for 2-4...
2008 FJC with 70,000 miles. Has a 6 inch Rough Country lift with brand new 35/12.5 17 on Method wheels. Within the last couple months I've had done the following: replaced front inner and outer cv boots, replaced front brakes, 4 new BFG MT, air and cabin filters, wiper blades, new 9 inch Sony...
Per my build thread, I just installed an Ironman lift, adjustable upper and lower rear trailing arms, and nitro UCA’s.
For the trailing arms I adjusted them to 10mm longer than stock (Ironman sheet said 10-20mm or something like that) to get ballpark. For the front UCA I just swapped them over...
Just got done putting 5 inch lift custom Alcan leaf springs in the cruiser today! I’ve only driven it around without shocks to shake down and measure for shocks but I’m super impressed at how flexible and soft the springs are. Going from Rancho 2.5 lift springs night and day difference!
4 plus...
Looking for a 200 series that is somewhat modified either with lift and tires or bumpers. I'm trying to keep my budget no more than 40k and I'm willing to travel for the right one and a clean Carfax with no accidents is a plus. Thank you!
Hello,
Posted in workshops as well, but the truck forums get much more traffic.
Just as the title says - I'm designing a garage, and I finally get to put in a lift. Going 2-post as space is a consideration, and most of my work will be wheel rotation, brakes, etc. - need the wheels accessible...
Hello,
Just as the title says - I'm designing a garage, and I finally get to put in a lift. Going 2-post as space is a consideration, and most of my work will be wheel rotation, brakes, etc. - need the wheels accessible.
The cruiser is the tallest car I own. Others are an 89 911 and an 03...
I have for sale an OME Medium Duty (Front and Rear) lift kit (leaf springs, shocks) and set of 5 very nice Cooper Discoverer Tires; currently on my 1989 FJ62 that the previous owner put on...
I am taking this FJ62 back to factory spec and am removing ALL of the OME lift kit and Tough Dog...
I assume it’s possible to determine one’s “lift height” by measuring from the bottom of the frame to a level driving surface (accounting for any different tire size from stock)?
If so, does anyone know the distance between the bottom of an 80 series frame in stock form and the road? If you have...
So got the new ride finally. Shipping has been a task this year, and this one took six months to get to me.
00, cloth interior, heated seats, AHC, body mount spare, no ATRAC, no lockers, 16 000 miles on clock!
So I had a specific wheel I wanted, but it's offset puts it inline with the fender...
Hello, I’ve swapped my OME springs to dobinsons for more lift. Selling my old springs to someone who wants a cheap lift. Reduced to $175 from $250.
I believe these are 2” with additional load on the front.
Verify fit and lift to your truck.
What is the easiest way around these metal ABS sensor lines/ brackets. I see there are tabs on the rear upper links and also where the @Delta VS panhard bracket mounts. Do you guys just bend/zip tie stuff out of the way or is there a better way? It’s a 94 model.
I’m installing @TRAIL TAILOR...
Here's a rear window mechanism that was hanging in my garage. year it is from is unknown. Tag says the gear is missing so you know it is in need of a new gear. Looks to be complete otherwise. Price $65 buyer pays shipping. Best to email me shmukter@pa.metrocast.net
LOW MILES. AHC Delete. Super Clean and Pampered Condition. Exceptionally maintained and tastefully modified 2003 LX470. This LX470 has only 169k miles and has been completely baselined. She has always hailed from Central Texas so it has an exceptionally clean underside with no rust and no leaks...
I need a replacements for my window lift channels in all doors of my HJ60 (1982) because they are badly rusted.
I am not able to find any OEM or aftermarket spare parts.
Anybody a solution?
FRONT DOOR:
BACK DOOR:
PART NUMBERS:
I need a replacements for my window lift channels in all doors of my HJ60 (1982) because they are badly rusted.
I am not able to find any OEM or aftermarket spare parts.
Anybody a solution?
FRONT DOOR:
BACK DOOR:
PART NUMBERS: