led

  1. CruiserTrash

    Wanted  Denver: 60 Series flasher modules

    Buying 60 Series flasher modules. Part numbers 81980-22070 (green) and 81980-16010 (black). Must be functioning and not have any melted plastic. I modify these for use with LED turn signal bulbs and ask people to return their existing unit to me. So far the success rate on that is about 25%...
  2. Guyute

    For Sale  JTX Toyota CANBUS Modules (LED/HID)

    Pair of brand new 12v quality made Australian canbus modules for sale. $30 plus shipping from Portland OR. Info from their website >> These new SMART modules by JTX now do the job of our old loom which addressed negative switching and they also fix the blue hi beam dash lights and spotties...
  3. jct23

    High beam and side marker bulb replacment suggestions

    Hey guys, I have a high beam/drl and side marker/turn signal bulb out. I am thinking of just swapping to an LED. I read through the forum and haven't had any luck on specific brands that would work, specifically with the high beam/drl. I know a lot of LED 9005s have issues running at different...
  4. M

    LED Replacemnet bulbs for LC100 (2002)

    Suggestions on quality LED bulb replacements for a 2002 LC100. Im sure this has been asked many times but have not been able to find the previous discussion. Any help is appreciated!
  5. B

    1994 LC prado modernization

    hello, my name is Baha I recently joined the forum and I am active duty military. I just purchased a 1994 LC Prado in Japan and is the car I am taking back to the states, just need some help in modernizing some small things so bear with me as i list some things that i see with my car, any help...
  6. texdoc77

    Fast Blinkers

    One issue I don't have solved yet is my fast blinkers. I think the rear lights were replaced with LED lights and now the blinkers are a little fast for my liking. I found some kind of interrupt you put under the dash but was just wondering if that was the only option other than going back to...
  7. desertwampa

    Halogen to LED plug n play

    Do I HAVE to have a relay/harness in order to use LEDS in the OEM housings? (97LX450) I bought what I though was plug n play LED bulbs, but seems like they may still require a harness. Are there any LED bulbs that have built in conversion functionality?
  8. Magnaman

    Is there a 9005 LED for a 2005 LX470 Hi beam that works with DRL's?

    I'm converting to LED's. Low beam H1 Hikari's seem to work, other than dust cap too short. Got Kreiges 9005's for Hi beam/ DRL's. No go. DRL's don't work properly. Anyone make a 9005 that will do Hi and DRL for this 2005 LX?
  9. T

    Light bars and pods

    I bought 52 inch light bar and 4 pods. Light bar is 711 watts and pods are 60 watts. I am little confused on his specs of course can't contact him either his email is junk etc. It's stating that the that his lights is drawing 17. 7 amps that's crazy unless I'm missing something. Any comments...
  10. V

    New LED headlight- no high beam

    Hey All. Recently installed some headlight housings from landcruisergrilles on my ‘99 and they look sharp. Picked up some 7 inch LEDs from Uni-Shine on the Amazon, got them in, connected with the pigtails that came with the housings and ……driver side high beam won’t light up. I know it’s not a...
  11. E

    KC LED headlights?

    Has anyone installed a set of the KC gravity LED headlights? Just wondering if these are plug and play.
  12. chefbige09

    Liftgate LED light

    I would like to add a light to the inside of my liftgate on my ‘18 LC 200. I have seen a video of someone tapping into the button for the power lift gate for a rock light. I have tried to search the forums but cant find anything. Any help would be appreciated. Thank you
  13. Tex68w

    For Sale  HTX: 200 Series-'16+ OEM LED fog lights and front park sensors

    I have the OEM LED fog lights and front parking sensors (4-white) from my 2020 Land Cruiser. They are in great condition, no defects or issues. $100 for the fogs, $125 for the set of sensors.
  14. Hornd

    High Quality Switch Replacement to LED

    Order Up the LEDs from SuperBrightLEDs.com - $2.50 each - Come with Resistors Remove Old Switches using a Flat Bladed Tool like a Skinny Straight Screwdriver Twist out the Bulb Holders. Using a Utility Knife or Tiny Screwdriver Undo the Wires from Bulb Holder Remove Wires from New LEDS - Wires...
  15. liltexz

    2000 Toyota LC: Hidden LED Bar (32”)

    Hey! Does anyone have links to brackets or examples of how I can fit a double-row 32” light bar inside the front bumper so that it’s somewhat hidden? I have Google’d but am going in circles at this point. Thanks!
  16. ERG80

    Depo retrofit with Morimoto M-Led 2.0’s and Profile Hi-Lens led high beams.

    This was my first attempt at a headlight retrofit. I read several other write-ups on ih8mud as a guide/ confidence booster. The other threads are very informative but didn’t cover the extra work of fitting Morimoto mleds. The mleds have a heat sink/fan making them a longer/chunkier projector so...
  17. E

    Low and Hi beams at the same time?

    Have LED bulbs so heat is not a problem. Few years ago with my Chevy Silverado there was a mod where i would put a jumper from low beam relay to hi beam relay and thus low beams would come on at the same time when hi beams were used. I would like yo do the same mod to my LX570. Did anyone...
  18. W03DY

    Tail light update from 03 to 06 LED UPGRADE

    found some LED 06 tail lights for $200AUD RRP is usually about $650 so i had to get them. not getting brake lights or red driving lights in the inner rear lights (the ones in the tailgate) i am not sure if theres a adapter or harness i can get to make these led's work as the harness has 3 pins...
  19. J

    FJ62 LED Headlight Conversion Information (Holley RetroBright)

    I just replaced my sealed beam headlights with Holley LEDs in a all-four-low, all-four-high configuration (thread). There's some stuff that confused me about this whole thing that I want to write down here before I forget. I hope it helps somebody else, or, most likely, myself when I need to...
  20. TriStar100

    LX Tails in an LC?

    Hey y'all, I just purchased an 07 LC and am looking at replacing the taillights with ones from an 06 or 07 LX 470. Are these plug-and-play since they're both LED? I can't find anything super conclusive on this, so asking it here.
Back
Top Bottom