Hi all,
Looking at replacing my injectors on my 4.6.
Its stock with a high flow fuel pump, adjustable fuel regulator, a decent exhaust system and runs the Harrop TVS 1900 supercharger @ 8psi boost.
Should I be looking at stock or high flow injectors ?
I know the stock Denso injectors are used...
I just replaced the original injectors with the Bosch for hole upgrade and the old girl just keeps flooding I can't drive it there's so much smoke and it's missing a bit it's just getting way too much fuel. Did these injectors show up bad regularly?
It's just terrible. Checked the banjo bolt...
hi I just pulled the injectors out and they all the tips were different colours especially 4th cylinder looked burnt. Just wondering if they need a rebuild now and if it could’ve done anymore damage. Cheers
My 2L-TE is a bit low on power. It seems to run fine otherwise, just not quite as powerful as it used to be. I tested the injectors, and they all passed the leak test just fine. They also all open at right around 2200 psi. The spray pattern looks good on all four as well, compared to pics I've...
Have a nice set of injectors from a 96 Fzj80 that had 250k miles on it. This set was cleaned and tested by Doctor Injector in Portland. All injectors passed with flying colors and have an even spray pattern and have been electronically tested and ultra sonic cleaned. Included is OEM o-rings and...
Hi guys looking to have a spare VE pump and injectors so I can have them as a hot spare after sending them out for rebuild
Injection pump:
22100-17290
VE6/12F1800RND676
096000-6760 9
02L0641 DENSO 729
Injectors:
23600-17010
Seeking out a set of diesel injectors and hoping someone has a spare set on the shelf they're will to part with. the truck can't be down for more than a day or two, so I'm seeking to buy a second set, and will then send my current set out for a rebuild when I can get to it.
23600-17010 is the...
Hello can anyone help me a this, I redid my injectors on a 96 4Runner 3.4 and when I put plenums and all hoses on I saw this port on the back of the bottom plenum there was no hose and all hoses appear hooked up. I will attach pic of port and port location. It has vacuum suction when engine is...
Good morning folks,
In getting power to the fuel injectors on a 5.3 out of a 2000 Tahoe, I'd like to use the wire that formerly went to my coil on my 88 FJ62. Is this a good idea? Thanks for any advice.
I have finally gone through the parts hanging out in my garage.
For sale here are a few parts from my old 3b powered FJ60, that has moved on to greener pastures.
7/23/23 Pending- 24V alternator $25
7/23/23 Pending x4- 8 Nippon Denso injectors pn: 237010E (see photos) $200 for all of them or...
I am possibly seeking an upgraded set of injectors and a modified VE pump in the future.
how do you choose?
how does matching work?
what is the process involved to match a set of injectors to a pump?
Hello everyone. I just bought a 99 HZJ 75 with 280000 Kms on the clock. At 300,000 I plan on giving it a tune up (Valve clearance, pump timing) when I change the timing belt. At the moment she runs well (smooth no smoke) would it be a good idea to rebuild/replace the injectors at this juncture...
My old 3B blew up and I got a new one, although it has higher Kms. My old 3B had the injectors rebuilt 60k miles ago so i figured I'd go ahead and swap them but they don't look nearly as good as the ones I pulled out of my new engine. I don't know much about injectors/how to tell when one is...
Hi, I have a 1983 Toyota pickup with the 2.2 liter L engine. I am curious about opening pressures for the injectors. I have sent the injectors off to be tested and rebuilt if necessary. The shops is saying that the tested pressures seem high. The Toyota manual for the L says the pressures should...
Anyone know the torque specs for the actual body of the injectors? I took them apart and cleaned them up and I’m seeing some good info on the 2H, but not much on the H. Thanks!
Hello all.
We have just pulled all of the intake system from the shut off butterfly to the head, it has all be cleaned.
Injectors have been rebuilt by Diesel Care Toowoomba.
Intake heater has been removed.
After clean and rebuild.
When decelerating and coming to a stop (in a manual) the engine...
G'day everyone,
I have here a rotary injector pump off a 3B up for sale.
Part no. 22100-55201
Located NSW Australia. Can ship at buyers expense.
Looking at $750 Aud for injector pump. Can also add fuel lines and old injectors if needed for an extra $100 Aud.
Ran perfectly when it came off no...
I've replaced everything I could think of, new fuel pump, new fuel pump assembly, new fuel filter, new injectors, new connectors, rebuilt the throttle body. It's getting gas to the throttle body, just not starting? it seems as though something is happening in the throttle body that is not...