I am looking for the vertical plate with the ball knob on it that ties the heater linkages together on a '76. Mine is on the left in the below photo. Let me know who or where to look, as Cruiserparts.net is a no go. Thanks!
I've had an issue with my 97' 40th (Auto A/C) since I've owned in that the heater control valve cable did not move. I initially thought the cable was broke or seized but have recently ruled that out as I've pulled enough of the bezel/controls/stereo to see and touch the other end of the...
I've just replaced the heater control valve, old one was a bit leaky. Now at the max hot setting it only blows hot air for about 10 seconds before it goes lukewarm. If I turn it down to full cold then back to full hot it does the same thing again. Anyone any thoughts as to why it's doing this?
https://vintageteqparts.com/collections/everything-else-hardware-fsms-shop-manuals-special-teq-stuff/products/copy-of-fully-restored-warm-pull-cable-assy-knob-fits-9-73-1984-40-series
( NEW PRODUCT RELEASE )
WARM PULL HEATER CONTROL VALVE CABLE
Part # 87286-60111
Made with ALL OEM JAPAN...
Apologies in advance for my stupidity.
got a 91 fj80 3fe and have a couple questions regarding the heater control valve:
1. for the 91 its discontinued but i can find one for a 93 and 95-97 - would they be compatible for my 91?
2. is the heater control valve something that can be cleaned (do...
I have had an overheating issue in my 1990 hj60 since I bought it 12 months ago. I have replaced the entire cooling system under the bonnet with the exception of the radiator which was taken apart and rodded and it just about spotless. After extensive research I have heard occasionally mentioned...
Blew the heater valve.at 263k miles. It was not just brittle, it was toast. Zero integrity.
Thought it was the PHH but that turned out to be fine. Replaced the pesky part since most of the fluid was already drained on my driveway.
PHH took about 2 hours between cold ones and mucho forearm skin...
New to the family 1993 fzj80. I am in the process of diagnosing why I have no front heat. I have a solid temp reading on the dash. With the cable disconnected at the firewall the valve feels to move freely. When I removed the radio and disconnected the cable at the servo motor the cable moves...
So Cal
Complete in-dash control modules
I have all three to choose from, 91-92, 93-94, 95-97.
All are from working FJ80s.
$75 each + shipping (Approx $12)
Paypal OK.
Ready to ship
UPDATE 1/22/15** ISSUE RESOLVED FOR NOW. SOLUTION ON PAGE 2
Figured I should start my own thread here regarding the issue I am having vs continuing to hijack old threads.
Little back story. Recently picked up a new to me 97 CE. Upon driving it originally AC worked great as well as heater...
I recently had a dash fire that burnt out ,most of the center dash ( Radio, AC box, heater box ducting and all wiring running to the center dash) . Luckily I had parted out an HDJ 81 last summer and John from Rad cruiser sold me all the plastic I had thrown out!!.. After having wired in all...