When I first got my LX 470 I got oem mudgaurds for a good deal but it turns out they are the rear ones. So just want to confirm these are for the fronts? I did get some hardware for them, which I think it right.
Here is link to the ones I’m wondering if they are correct front mudguards...
I'm looking for the hardware that goes inside of the driver's side ambulance door. this would include the rods, latches, springs, etc... I have a late model 1984 FJ40
Good afternoon. While trying to get things setup for my Wits End QPM I tried locating the hardware kit that came with it but misplaced it.
Basically need to thread pitch for all hardware that came with the kit.
Thank you.
I'm building 2 sets of bi-fold doors. One has partial hardware, other has none. Planning on replicating the wheel mounts, and sourcing out some rubber wheels, or making them. What I need most is the latches. If anyone has one, two or even three laying around, I'm a buyer. And for that matter...
Have a nice set of FJ40 defroster hoses, has the big main hoses, the long snaky defroster tubes, the side window defroster outlets, and brand new plugs from Specter for the access holes in the outlets. $SOLD for the set.
Have a decent ash tray for a 40, has the mounting screws, parts are solid...
Tried to take my roof rack off my 2000 Cruiser to clean the channels and a bunch of the hardware is rusted.
Anyone know the part number for replacement bolts? Or can you recommend what you substituted from the local hardware store?
I found a possible part number but not sure if it is the...
I accidentally purchased two kits. Genuine Toyota parts. Fits 80 and 100 series with disk brakes.
This will fix your parking brake if it is frozen.
4 x - Parking Brake Tension Spring
2 x - Parking Brake C Washer
2 x - Bell Crank Pin
1 x - Right Hand Bell Crank
1 x - Left Hand Bell Crank
1 x -...
The 2 Bilstein shocks I'm removing each have 2 cupped washers with a rubber spacer between them, at the top of the shocks.
The new OEM shocks I received each come with 2 thicker rubber spacers (90948-01064). Do I need these? How should they be placed?
The dealer also said I needed these 2...
ISO Fit Kit/Fitment Kit/Mounting Hardware for ARB Deluxe Bull Bar for 100 series 98-07
Fitment kit part number 6172342
Bumper part number (for reference): 3413190
Other part numbers it may be known by: 6172342SP, 6172338, 6172338SP
Pic below for reference. Located in Richmond VA, willing to...
I have a 2019 and need to tow, occasionally. Looking for the dude that ditched it for an aftermarket bumper or more ground clearance.
I have a trip planned from Georgia to Indiana via Tennessee and Kentucky for Christmas.
Another from Georgia to Texas through Alabama, Mississippi, Louisiana...
I'm looking for the Toyota Part Number for the front fender clips that allow you to bolt the fender to the inner fender or (apron). I painted my FJ60 over a year ago and apparently I have miss placed them. I can't seem to find it on any parts diagrams that I can find. Thank you.
Hey all, I justified buying an 80 to cart the kids around…and mamas starting to ask questions about when the third row is going to show up 😄. Looking for the third row and all associated mounting hardware/seatbelts near Phoenix, AZ. I’d prefer brown cloth, but open to any colors.
Thanks!
Body guy called me this morning. Said i need to be ready. . .Nemesis is finally making her way to the paint booth.
Is there a centralized nut/bolt/washer/etc. diagram that will help with determining what hardware goes where?
Mainly looking for diagrams related to hood, upper/lower tailgates...
Funny how when I took this stuff apart, I was so confident that my memory would guide me when it came time to reassemble. 12 years later and a corrupted hard drive and I'm clueless :rofl:
Anyone out there able to tell me what/ where these go? both are 10mm - thanks
Been working on an interior restore of the ‘97 Land Cruiser and after taking as much care as I could saving hardware, taking pics, etc, I have one piece that is lost...2nd row passenger seat belt top anchor.
Any advice on how to track all of this down…bolt, spacers, and the clamshell...
'04 GX 470 my rear side quarter window latch bolt assembly loosened and fell out somewhere. The latch is in great shape but I'm having a tough time finding just the bolt, washer etc to put it back together with the glass. Thanks