grease

Super nice early grease gun, never used. This was included in very early Land Cruiser tool kits. Missing the straight nozzle. $165 $145, which includes shipping to the US. Paypal F&F please.

I just swapped my OEM wheels for 18" Tundra steelies / new rubber on my 2017 LC, and I noticed what looks like old grease on the rear caps (see pictures). Is this any cause for concern? I don't notice any particular issues while driving, but I was under the impression that there's no regular...

Wanted to run this by the hive mind and put it all in one place as there appears to be at least 47 different methods (according to the internets) on how to grease your brake components (brake pad contact points, slider pins, pad support plates, anti squeal shims, emergency (parking) brake pivot...

Hey all! Up for sale is a grease gun from the ol’parts stash. Good used condition. Comes with a new KTC grease nozzle! :cool: Perfect for that onboard toolkit or just around the shop. Asking $150 plus shipping.

Trying to install the new 555 ball joint for LCA, and then realized one on the left seemed having less grease than the other one at right. Is that a concern? If to add more grease what grease should I use? I happen to have the Calcium Sulfonate Complex NLGI 2 grease which looks like in the...

I sprayed the tracks of my sunroof with silicone spray lube, but it still seems to have a bit groaning sound. I use it regularly and it hasn't gotten stuck, but I'd like to prolong its life. What type of grease should I use, and should I be greasing anything other than the visible track when...

My 84 has grease on the front hub. Is this normal or does it imply something needs repair? Attached is a picture.

I called my local dealership to get some parts for the nice weekend weather repair work I have planned, and while I had them on the phone I asked if they had a part number for the grease used in the electric motor driven gearing (specifically the window motors). What they came back with was...

I just bought this stuff thinking it would be grey in colour but it's brown. Can i use this to pack the birf and housing? Has anyone used this before? Does the colour matter?

Hello all, I've gone through 2 sets of OEM axles in the last 10 years. I guess it doesn't sound that bad. But I'm a 4x4 poser. I hardly do offroading. Just once in a while. I have your typical OME lift. I believe it's the 2.5? The one with the diff drop. Anyhoo, I keep getting grease leakage...

Hi, all. I'm sure this is all over the forum, but I'm new and never had a solid front axle before, so searching would be pointless... anyway, is this heavy buildup of grease normal or the result of some problem?

For additional info, I did skim through these two threads below. How I grease my front driveshaf Drive train lubrication My questions are: Do I have to get all four wheels off the ground at once when greasing all the zerks? Or, can I jack either the two wheels of front or rear separately...

Will be starting a good size project for an old fart in the fall… is there a great way to try and clean off the hard dry grease and dirt that has been stuck onto the underside of the FJ45 for probably the last few dozen years? I’ve noticed the pressure washer alone does a mediocre job but does...

After my 12V wiper sat on the shelf for over 10yrs before putting it on the Ute I think the grease is mostly dry, it moves quite slowly. I would like to clean and re grease it before going on my fall trip. What kind of grease would I use? If anyone has a good working LHD 12V wiper motor they...

A few months back I had a grinding noise at low speeds/ low to no load. After some help from you all I replaced the rear DS, with a new fully assembled Toyota DS, which solved the problem. I called the dealer and couldnt get a definitive answer if the DS came fully greased so I added grease to...

My daughter has our 80 in Annandale, VA just outside the beltway. The LF wheel began smoking and its birfield grease on the inboard surface of backing plate. As routine maintenance, I added grease to the plug about 500 miles ago, checked tightness of the 4 lower knuckle nuts and left town. Then...

Hi - today I watched a youtube video - showing how/where to grease the UCA ball joints - went to my vehicle but no zirc fitting - has anyone got some context? - what to do? Fit zirc fitting? - photos below - red is my UCA (flat nut) - blue is the youtube vid where u can see the zirc fitting -...

So I bought the Super Lube Silicone Lubricating Grease with PTFE to lube up my UCA"s. Here's the Amazon link. Super Lube 92150 I'm wondering if its okay to use this same grease for lubing my drive shaft. I know a lot of people run lithium or moly for their shafts. I don't have a problem...

I went to check out a 1999 LX470 this afternoon and it was looking ok until I got to the front end — the passenger side CV boot had all kinds of grease around it, including slung on the inside of the wheel and tire and the rear of the fender. The owner said he just had this boot replaced. Maybe...

Today during the rain I encountered a puddle and slowed down to not swamp my engine with water, the puddle was on the passenger side and didn't want to suck water up in the air filter. But I believe some of the connectors inside the engine bay got wet, as the LC would idle low and I would...