This is a 1982 FJ60 carburetor that has had the jets removed. I was present when it was taken off the truck, and watched another guy carefully remove the jets for a project. It is otherwise complete, as seen in the photos. Lots of great parts, or install jets and run it. It has been boxed in my...
Does anyone know what option code the auxiliary tank is, or if it is even available. 18 gallon main tank is not going to get it done for me. Asked my dealer about this who had no information. Hope this can be ordered from the factory. Thanks.
Just curious if anyone has installed the Holley EFI fuel pump module in their fuel tank. I have a 1980, so the tank is under the rig. Wanted to see if anyone has done it? Any pitfalls, suggestions, or tip?
I have a 94 80 Series and I am looking for an fuel pump. Not sure if I should have posted this here or in another section. Where is the best place to order one from? Dealer? Any affiliates sell them?
I have some parts that need a home. They are all located in Utah, about 30 minutes from SLC. Make me an offer on anything you are interested in, I will accept any fair price - more looking for good homes than to make a ton of money.
- H engine that is mostly complete that needs a new home. It...
According to the official specs posted today, the LC250 is rated with 91 octane fuel. I’m wondering if the recommendations in the user manual can differ, and whether or not using regular fuel would have warranty implications. There is a pretty big difference between the two fuels in terms of...
It's been a while since I changed one last but ordered the 23300-69045. Opened it and the filter inside has 23300-66040
Anyone else run into this and is it correct? Don't have the old one off yet to compare it to
"Land Cruiser has received an EPA-estimated 23 MPG combined rating which is a higher combined MPG rating than any previous iteration."
23 MPG seems poor for a 2.4 liter engine.
Bought for my rebuild. Brand new in their boxes. Going a different route. Ordered via PartSouq so returning would be a pain.
Toyota 23209-74080 INJECTOR ASSY, FUEL QTY 6
For 1fz-fe 80 series.
I paid $155.24 ea for a total of $931.44 + tax/ship/etc.
Will sell for $900 shipped USPS flat rate.
Can't afford OEM and the Denso's are out of stock everywhere. Anyone have options?
Need a fuel pump assembly kit, fuel sender, and filter asap
2005 LX470
All,
Trying to source a new fuel filter housing. Mine is stamped with 23300-17030. Not finding that anywhere, only 23301-17030. Looks the same, just wanting to make sure I won't end up with wrong size input/output hoses. Mine are 12mm in and out.
Just a simple superseded part number?
This came from a running 40 I parted several years ago - it appears to be the exact unit sold by Cruiser Corps here for $279.95 with the addition of sender
https://cruisercorps.com/collections/fuel/products/gas-tank
$160 plus shipping from 50312... please pm me
Hey Mud,
Looking for bit of assistance here. Took my 94 in for smog and it passed everything EXCEPT the Fuel Evaporative Controls Functional test. Tech explained that they pressurize the tank and if it leaks a certain amount then it fails. Says likely a hose or something.
Before I go dropping...
I have a 4/72 FJ40 that now has a 5.7 SBC engine with a Holley Sniper 1. I have also included a picture of the fuel original tank. The engine starts and idles fine, but as soon as I drive the vehicle, it acts like its fuel starved.
There is no fuel supply port on the bottom of the tank other...
Replaced the fuel filter on my 91. Put a new OEM one with new copper gaskets and went to start it up and nothing, only cranking away. Traded the filter out for another one and the same thing. I undid the “out” side of the filter to see if it would pump fuel when I cranked and it did.
Does...
Been chasing down a fuel leak at the tank on a Japanese gas hilux.
Leaks when filled, to a point. Initially I suspected a leak at the fill/overflow hoses (red arrow), since it is lower than the high point of the tank. Gas tank of a 22R American truck shown for reference.
We pulled the bed...