Hello! Looking to buy flywheel bottom cover assembly for my 1966 FJ45 (F-engine, 3-speed manual). I am in Southern California.
Offers and leads would be highly appreciated
Thank you!
I am replacing the clutch in my 1970 FJ-40 3-speed. I took the flywheel to a shop to have it resurfaced. He did not have any specific specs to go by, but simply took the same amount off both of the step surfaces. The difference between the two surfaces is .755. Does anyone know if this is within...
Just on the odd chance does anyone here know what torque setting I should be using on a flywheel that came out of a 2023 vdj79 series or if loctite should be applied I am fitting it to hzj80 model. Thanks in advance
Without getting into a long story, is there a way to tell the difference between a 4 speed flywheel and a 3 speed flywheel by looking at them? I don't have them near by, so I can't get a picture of mine.
Thanks,
Justin
I have most of the parts necessary for a H152 transmission swap for sale. Many of them are New Old Stock (NOS)/New in Box. I have listed the parts below and have corresponding photographs. This transmission could be put in an 70 series, 80 series, 100 series gas or diesel.
I'm asking $8,250 or...
Has anyone ever redrilled a 1HZ (275mm) flywheel to accept a 300mm clutch cover?
Why would I bother? Because the 275mm flywheels are sorta worthless… and the 300mm flywheels are $700-800.
Selling left over parts. All new in boxes.
31250-60401 -> Clutch $200
31210-60162 -> Clutch Cover $225
13405-17020 -> Flywheel $450
CMT-040 -> Master Cyl. $50
Or all for $750
Does anyone know the flywheel runout on a 3B flywheel? I have some scores in my flywheel and I need to determine if it can be resurfaced or is it too far gone?
See below and after pics. Soaked it in white vinegar for two days.
Thanks
Client is going a different direction. Selling off this HJ47 bellhousing, freshly machined flywheel and rebuilt and converted to 12V starter.
This bellhousing bolts to the H series engine (12HT, 2H) and uses the factory mounts on a 40 and 50 series frame to support the transmission. Have...
Client is going a different direction. Selling off this HJ47 bellhousing, freshly machined flywheel and rebuilt and converted to 12V starter.
This bellhousing bolts to the H series engine (12HT, 2H) and uses the factory mounts on a 40 and 50 series frame to support the transmission. Have...
I am about to have my clutch rebuilt and in the rare case my flywheel needs to be replaced after resurfacing is there anyone in the Atlanta area that has one that I could buy and/or replace with a brand new OEM if I had to do it? In order to get one it will be a few hundred bucks to buy, ship...
‘79 FJ40 4 speed transmission and transfer case. Purchased from a fellow Mudder years ago and never used. Been stored inside a shed since I had it, but looks like it may have been outside before.
Price $300 local pickup
‘79 Bellhousing 2F $100 local pickup
‘79 Flywheel 2F $75 local pickup...
Cleaning up a bit here and ready to let this 2LT flywheel go to someone who can use it , I had it media blasted a few years ago that is why the finish looks like it does . Ideal for someone wanting to get rid of the hp stealing automatic behind their 2L engine .
100$ plus shipping
Description:
Flywheel Housing Bottom Cover along with its gasket 04317-60020
P/N:
31104-60020
Condition:
NOS ( New old Stock genuine part in excellent condition , only have minor storage scratches as shown at the attached pictures).
Fitment:
Fit on 4 & 5 speed
Fitment pictures attached...
Hey all, long time no see!!! I'm bringing back my BJ44V back to life after a hibernation of 5 years.
She has a 1982 3B upgrade (from a donor BJ42) that was put in there a year before she went to sleep.
all running fine although the clutch made a squeecking sound when engaged.
so I have decided...
I'm gonna be home to put a new clutch in the my landcruiser.
Found the attached Clutch instructions that may apply and searched the FAQ?
What is the step machining required? AISIN specs out +0.5MM step.
Do I need to have the machine shop Resurface clutch contact area,
and bring down the outer...
Hi all,
I have a 1976 FJ40. All original except for the chevy V8. I am converting it back to the stock 2F engine configuration. Does anyone have a stock flywheel for sale?
Also. If anyone is interested in the Chevy 327cid engine for their build, it will be available when my 2F is ready for...
After replacing all the main bearings and rod bearing because I believe there was a knock coming from the engine, I went to turn the engine by and and noticed that the flywheel was loose and was most likely the reason for the engine knock (the bearings weren't great so the change should be ok)...
I have a 1984 fj60 with a 2FE conversion with H55f. I replaced the clutch and flywheel a while back ago and when i removed the old flywheel it had groves worn in on the engine side of it that the new one didnt have. And where you press in the rear main seal the metal on the block is flat, shiney...