fitment

I'm due for some new rubber and looking to up size my 33 Duratracs (275/70r18) to some of the new AT4Ws. I know 34s at 295/70r18 would be a slam dunk, but I'm tempted to go to 35s (285/75r18)- I see some folks saying 35s won't fit in the stock spare location so looking for some feedback on...

I’ve searched and couldn’t find anything on the ADS 6” piggyback res shocks. Anyone running them? Specs are a little different when comparing to their 6” remote res option (same as slee). 2” less stroke but I’m okay with that since I’m only on a 3” spring. Mainly looking for a pic of fitment...

Hello all, Us 13-15 landcruiser people don't have any really good bolt-in LED fog lamp options due to toyota using a larger pattern for their mounting brackets. The same year LX has a compact assembly that is shared with other more common toyotas and as a result the LED manufacturers offer...

Hi all. I have an early `66 40 that came (to me) with no hard top. I've slowly aquired 2 of the 3 main components to an early corrugated top. I've read all the posts on mud regarding, but it's still not clear to me. My 2 concerns: will the older fiberglass top line up on the windshield? And will...

Just thought I would post up my experience with this. My original steering wheel had about 315k miles on it, and was in need of replacement or recovering. I personally have not been impressed with the way the recovered steering wheels look. A "close color match" wasnt what Iwanted, and for...

Stock TRDP come with 18in wheels but I'm tempted to try out my 17in with 37s off my LC80. Before doin all the sweat work on the swap looking to see if there's any intel if this will even work on the Gen 3 rigs... I definitely want the meatier tire look but also don't want my calipers to shave...

Black Friday is coming up and I’m thinking about pulling the trigger on 35s for my 08 LX. I’m looking at the Method 703’s in 17x8.5 with 35 offset/6.2” bs wrapped in Kenda 35x10.5r17. Anyone running this offset with skinny tire combo. Looking for feedback on fitment. Thanks in advance.

Looking to purchase an ARB Deluxe Bullbar 3412130 for my '96 Troopy this Black Friday. Now the question is, what winch will be compatible with that bumper? I called ARB USA, but they don't seem to know much. Has anyone had experience fitting a Zeon or VR Series 12S on this bumper? Or do you...

2004 lx470 stock AHC Found a killer deal on 285/70r18’s Will the fit at stock height!

Hey all, see photo below of how my windshield is sitting in relation to my door these days. WS is not in place on the door at the moment, so I'm assuming this is all due to an old windshield gasket that isn't compressing fully? Dash screws are fully screwed in too.

I got a y and cat a couple of years ago. And the rear Y flange was a bit off at an angle. If I tried to bend it over it would cause an alignment issue. The problem is I got it to work and seal up. But that extra angle is blowing the gasket up over time. I have put three gaskets in it now. I even...

Anyone see any issues with mounting these on a 100 series? From what I understand I’d need 1.25” spacers in order to run the wheel centers. However, are there any other issues I’d run into anyone can think of? These are similar to what a new pro tundra or sequoia come with, but in a 5x150...

Good evening gentleman, I've had the lx600 for around 6 months now and the car has been amazing, though i just cannot get over the rake it makes the wheels look disgustingly small, anyways is there anyone that has tried lowering it by moving the rear AHC sensors? I dont mind the lower clearance...

Can these fit a 2008 Lx570 with no mods..all stock? (wildpeak at3s)

Will a 72 hard top work on a 74? I have a line on one for my 74. Thank You

Hey all, Because it’s my luck that whatever can go wrong will go wrong, I just want to doubly confirm that 275/70/18 KO2 tires will fit a stock 06 LX470 with no rubbing at normal ride height. Don’t want to spend $2k for tires, mount, road force balance, and alignment before I know it’s going to...

Starting the year off with some fresh 40 series ceramic headers from Specter Off-road. After mocking them up (what a pain 🙃) it almost looks clear to me that I have to notch out my OEM skid plate. They had no instructions and calling made things even less clear so if anyone installed this set...

Hey everyone, I'm considering picking up a set of 15" wheels for my 100 series. Before I pull the trigger I just wanted to make sure that they would fit, primarily over the brakes. I couldn't find anything about 15" wheels and the 100 series so any help would be much appreciated!

First time poster. I have been reading the forums a lot over the past several weeks as i recently picked up a 1980 FJ40 with a 4 cylinder b diesel. I have a lot of things that i want to do with this 40, but i am gathering information now so that i can begin to acquire the parts. My 40 came with...

I have a 1998 with the two 4” woofer enclosure. I am looking to see if the later model enclosure with the single 6.5” woofer will fit in my truck? I know the sound isn’t ideal with these type subs, but I really don’t want a large sub box sitting back there, at least not right now. I will...