elocker

Good evening all! I snatched up a couple of axles with locking differentials and 4:56 gears. The axles were off of a 1991 HDJ81. I am getting ready to plug these in under my 97 FZJ80 and have a problem with the actuator fork and collar on the front differential. I removed the actuator from...

I am planning to put an Eaton Elocker in my HJ61 but going over the wiring has me a little confused since I have a 24v system. I have a 24v-12v converter that I run my radio and GMRS radio on, so I am thinking this could take the place of the battery on the wiring diagram and everything should...

Selling my Diamond solid axle setup for a 100 series. The housing and shafts were purchased through Front Range off road. These are extremely stout housings with 0.375” wall DOM tubing, billet 80 knuckle balls, 0.500” thick diff mounting flange. Parts are for a radius arm setup. This is the...

I've looked around quite a bit and see a lot of threads with bits and pieces for the suggested parts list for a front and rear rebuild. I have amassed the selection of parts outlined below in my Partsouq cart. Does this look like everything I need? Am I missing something or should I just call...

Earlier this year, I picked up a A9334 Harrop Elocker for $200, which had suffered a mechanical failure. It had been used in the rear of a Hilux, and came still fitted in the diff centre. My plan was to rebuild it and fit it to the front of my 80, which uses the same locker. The problem was an...

i made a little video about the "gray wire mod" for the elocker. for those that don't know, the purpose of the mod is to make the locker available full time without needing 4L to engage. also kill the speed limitation. this should work with all rigs using the typical elocker brain. 1st and 2nd...

I pulled my rear diff lock motor and I mangled the heads of two of the Elocker motor bolts trying to remove them. I think they’re a 90105-08114. Can anyone confirm the part number or recommend an alternative? 1996 fzj80. This is them and where they go. Thanks!

In the Sacramento area Part is off 1996 80 series US spec Rear elocker with wits-end rebuild kit - $200 Elocker was taken off and not working - the throw of arm was not extending all the way

A friend of mine is selling this 1994 Limited 4Runner near Denver Colorado. $6500 OBO. He isn’t on forums but I can get you in contact with him. 4x4, E Locker, 234K. Everything works, no check engine lights, recent emissions passed. https://www.facebook.com/marketplace/item/550593700013908/

Hello IH8MUDers, I recently acquired an 80 series from an owner that had bought a brand new set of Harrop Eaton E-Lockers, Hi/Lo 10% Sumo Gears, and Terrain Tamer E-Lockers Bearing Kits for a Toyota Land Cruiser 80 series but never got to install them. I was given all these parts as part of the...

Selling our beloved Land Cruiser, purchased several years ago through this forum. It is [sob] no longer practical for our fam. Would entertain a trade involving a newer Toyota Sienna. We love love love this vehicle. Eager for it to go to a new owner who will give it new life and adventure! Feel...

I'm going to a salvage yard to grab one today and want to make sure I pull the right thing. I already pulled the harness and axles.

I drive a '99 LX470 and have used the hand brake trick with my LSD for a while. It works but it also requires a lot of e-brake maintenance and is not as reliable as a locker. If anyone finds themselves looking to sell a rear axle with a locker (with a harness would be crazy cool) I would...

Hello everyone, Thanks for looking at my rig. I can be reached here but fastest responses will be via text. 541-nine seven three-8822 Looking for $13,500 In person deal only The truck is located in Ashland Oregon 97520 Linking here to my CL post...

Hi, anyone selling a elocker for a 9.5” Land Cruiser axle? Im in California thanks!

https://cruiserbrothers.com/harrop-elockers/ I’m going down the road of installing a rear Harrop in my 460. I ordered from Georg@CruiserBrothers last weekend. It should get here next week. https://forum.ih8mud.com/members/orangefj45.1209/...

Hi Everyone! *CURRENT STATE. BULLET AK SURVIVOR * FOUND 12 AK BULLET HOLES* This is the 2-second coat of primer BBQ TIME + SANDBLAST + RAPTOR FLOORS IMRON PAINT ***Last spring 2020 I got this Troopy from the Netherlands (originally came from Georgia) and imported it to Canada...

I have a 98-02 (4speed) 100Series rear E-Locker for sale. It Comes with a new 12v guy actuator harness and switch and has been tested. Here is a video $900 Freight Shipping Hub to Hub should be around 250. Let me know you zip and I can get a quote for you

Looking at all options. Let me know what you have, asking price and where. BUYING ASAP! thanks

E-Locked Toyota FJ80 / FZJ80 / 80 Series Landcruiser rear axle 9¼" diff (chunk/drop out also compatible with FJ60/FJ40 axles) Full Floater (I was told from a 1993) Complete MINUS all brake hydraulics (no calipers, hoses, hard brake lines) - I got it this way. If you've got a 93-97...