I have been chasing factory e lockers for my lx470. Second hand they are still very expensive, if they ever come up. But I did find a supplier in china who sells them. Landed in Oz they work put to about 880aud each new. Only catch is I have to buy 10. Would these be reliable? Has anyone bought...
Hi Everyone,
I am selling my 1998 3G4R Limited with e-locker, including original sticker price and manuals
- 315,xxx miles
- Factory e-locker
- Falken Wildpeaks tires 265/70R16
- A/C Blows cold
- 4WD engages and works
- Otherwise it is stock
- Used the car to car camp and haul bicycles around...
Looking for a 2010+ FJ 8.2 rear end for my GX470. Recently popped the stock GX rear and am looking to upgrade. Looking for either full axle assembly with e-locker third member included, a straight housing, or an 8.2 third member w/ e-locker (stock preferred, but ok if it’s regeared to either...
Pulled the trigger on the Nitro sale and my Aussie locker won’t work with the new gears. ISO Eaton e-locker for 1997 80 series rear 3rd member with 4.88 gears
SoCal; can ship same day:
This is the factory, Denso, mini ECU for locker control on USA 12V factory locker systems.
No water damage, No dirt, No issues. The front and rear lockers are already sold. The buyer has this ECU.
This module fits in the Passenger Side Kick Panel. This module is...
I have a 98-02 (4speed) 100Series rear E-Locker for sale. It Comes with a new 12v guy actuator harness and switch and has been tested. Here is a video
$900
Freight Shipping Hub to Hub should be around 250. Let me know you zip and I can get a quote for you
E-Locked Toyota FJ80 / FZJ80 / 80 Series Landcruiser rear axle
9¼" diff (chunk/drop out also compatible with FJ60/FJ40 axles)
Full Floater (I was told from a 1993)
Complete MINUS all brake hydraulics (no calipers, hoses, hard brake lines) - I got it this way. If you've got a 93-97...
SoCal
This is complete with wiring harness, brakes and all. Ready to bolt in. Full Float from a 1996. The wiring harness is a simplified harness built by the 12Vguy.com for easy installation into a non locker FJ80.
(The axle is out of Mud member "Zapata"'s awesome FJ80).
Price is $1,000...
SOLD SOLD SOLD
I have a TRD rear electric locker, not sure if it's from a Tacoma or 4Runner, can't remember the age either. I bought it as a spare years ago in case anything ever went wrong with the one I had in the back of my mini, but never needed it. The front pinion bearing was bad when I...
Most info I have come across searching for rear axle upgrades, re-gearing, & lockers is located in build threads and it's difficult to piece it all together.
So I would like to make this a comprehensive thread with all the info you could need in one location. In this thread I would like to...
hello all,
My front e-locker will not engage. I use them regularly and both axles have always quickly locked and unlocked. A week ago when I turned the lockers off the front would not unlock. I turned off the center diff lock and drove in circles forward and backward until it finally...
1998 Land Cruiser w/ 175,000 miles. Purchased spring of 2015 at ~155,000 miles. Exterior and interior both in good shape - no damage to clear coat and no tears in the leather. Some rust underneath - has spent its life in the northeast. Oil changed with Mobil 1 synthetic oil and filter every 5k...
Hi everyone,
I have a 95 fj80 with e-lockers. I had to go out of town and had a shop change the oil, replace the differential gear fluid, they checked out the e-brake and the checked out the EGR.
I got it back tonight and as I'm prepping for Toyota Jamboree I decided to engage the lockers to...
I'm trying to get my e-locker third to come out of the axle housing, but I can't get it out. I slide out out on the studs about 1/2 inch and then 'clunk' it hits something. What do I need to do?
Thanks!
I've been slowly rebuilding my front end drive train since last August when I had an unfortunate incident on a gravel road. I won't go into that in detail here, but one of the results was a blown front differential. A few months ago I was made aware of Harrop's option for the FJC through...
I did all the interior wiring/relay stuff for my rear e-locker before I turned it over to the pros for installation.
I ran the power wire under the RH rocker cover or threshold plate. It popped out again under the carpet to the right of the rear seat.
This is how the mechanic finished the...
Hey all,
I've got a line on a 93 Cruiser with e-lockers for about $2.5k. It has a bunch of other parts I'm interested in grabbing for my current rig - a 97 Cruiser, so I'm not considering this price for the lockers alone.
For the fairly light trails I do a few times per year, there is no...
For Sale, FZJ80 Full Floater E-locker Rear Axle. Complete, except for brake calipers. 4.10 gears. Tested the e-locker with 12V but no movement. I have not had the chance to troubleshoot it. I don't think it has been used in a long, long time.
$650/obo
Pick up near Auburn, CA. Shipping is...
Selling the following parts from a 1994 factory 3X locked FZJ80. Rear electrical harness including actuator vent tube, factory locker dash switch, and Toyota ECM for lockers.
SOLD for all, plus shipping. Will fit in a flat rate box.
Rear harness:
Dash switch and ECM:
Hey all,
First, lets wish Woody good luck at Hammer '17 tomorrow. There is a entire community wishing he will be victorious.
I am clearing out my garage of all unused parts.
Items are listed with all pictures. As stuff gets sold the details will go away.
Buy pays shipping cost also if needed...