When I bought my 88 FJ62, the front passenger window did not operate at all. I just replaced the motor for that window and now that it’s installed, the new motor will work when pressing up on the switch (from both the driver master control and the passenger door control), but neither switch will...
Hello all,
I am searching for a thread or some insights on attaching a kick down cable. I have recently did a transmission swap, but a lost on how to connect the kick down cable properly.
Thanks in advance
I normally just read and search, so posting is because system had that on the list. Hope everyone is well, I will be looking for info on head swap and what to do while I have it off for good measures. Thnx all
These blokes down in OZ drove there " J-40's " underwater for 8 straight Kilometers ...... this technical aspects are worthy of Christmas day 2024 :santa: 🍻 🍻
For a year, i have been able to push the kickdown cable back into the sheath when it got slack. (i could hear the shifting wasnt correct and i would pull over push it back in ..... where it attaches to the gas pedal cable swivel thing under the hood). Couple weeks ago it would not push all the...
I've a down shift cable question. Need to word it first. Anyways, just saying hi for now because i just joined. Is this where i should post my question?
Hey everybody!
I just bought a 2003 LC with approx 250k on the odo. This is my first LC and I'm a noob at serious off road stuff despite owning all 4wd/AWD vehicles and living in an area with abundant opportunities for offroad exploration!
The Good: The cruiser is really clean and good to great...
Does anyone know if there is a compatible upstream threaded Denso O2 sensor? Building a turbo down pipe and want to see if I can get away from the 2 bolt flange style and use a weld on bung.
I have a 2011 LX570 with 200k miles. I was replacing a u-joint on the front drive shaft when I noticed evidence of a coolant leak. It appears to have been leaking for a while but not enough to make it to the garage floor.
It's hard to see where it's coming from but I can see most of the leak...
My 80 has brand new OEM shocks and front springs. The hangers for the exhaust have been checked and are fine. Yet, there is still a squeaking that comes from underneath that sounds like metal on metal - i can't tell which side it's on and I know it's an old truck and will never be quiet, but...
Hi, Anyone have a bipass hose for a 1987 Land Cruiser . Goes on the thermostat housing. Been broke down for 2 days. Can’t find one anywhere. Thanks, Mike
Hi. Looking for a fold down gas door for an older FJ40. Need lock, latch/catch and door. Also need left side round outside mirror that attached to door hinge screws. Thanks.
I have this melt down that occurred from the ignition switch to the connector. Two wires, I can't tell what color they were. The female connector wires were Black with a green stripe and black with a blue stripe. Any ideas why the melt down happened between the switch and the connector?
I currently have my 200 parked in my garage as I start the process of transfer mods over to a new 200. Withe the weight of accessories already removed, I’ve had to air down to 10 psi to fit the 200 in the garage as the rear is now too tall.
Wondering if keeping the tires at 10 psi with rig...
The High Lakes were hit hard by the Dixie Fire a while ago, but they still have some spots where you need 4wd… and it’s natural beauty is still there. Perfect place for a shake down in my FJ40 and a freshly built Bronco.
Happy Sunday funday folks.
Anyone with a 24v Cruiser have any luck with Victron Orion Step Down Converter? Im looking at putting one in my BJ42. Ill go with the 70 amp and a 12 block fuse box from Blue Sea so Ive got some room down the line for adding extra stuff. I learned a lesson long ago...
I replaced my alternator with a spare yesterday while trying to figure out some other problems (my other recent post about blinkers causing the edic to shut the engine down details this) but I thought post a sep post about this. This didn’t fix my shut down problems either.
after the alternator...
I stumbled across this while I was scrolling through GXOR and wanted to share it.
I have wanted something like this to hold my winch circuit breaker and was looking to actually have one made until I saw this.
https://www.kaon.com.au/battery-fuse-bracket-toyota-prado-150-120-fjcruiser
I will...