Is there a source for factory wire connectors? Specifically I‘m looking for the ignition + connector for the igniter of a 87’. I could cut it off and use a generic one but….
TIA
Currently doing a Nav Delete on my 2006 LC, I have two unused connectors. Trying to figure out what they run / power.
The smallest one connects to the old nav screen and I believe it is called the M7. (3 wires)
The second smallest one connects to the tape deck unsure what the connector is...
Hey Buds,
The wiring harness (97 FZJ80) under the steering wheel has these 3 connectors?
Does anyone know what they are and what they could plugs into?
Thank you
Refreshing your 60 Series Gasoline or DIESEL Alternator Connections Connectors Rubber Boots Ring Terminals
Mounting Hardware 33+ Years Later and Why :
i will go over my recent experience and what i discovered on GHOST's 3FE 5/89
- digging hardened then hard in JAPAN to find the original...
I just noticed a melted connector for my #2 oxygen sensor now that I'm working on the exhaust for my build. The connector is from my 1999 4Runner donor engine. I actually need both sides of the connector but I have a feeling I'll have to buy a new sensor to get that side. Hopefully not. I'll...
Really interested in the payload and static/dynamic roof load ratings. I do like that even the base model has an integrated brake controller and 7 pin / 4 pin connectors installed. The connectors do sit very low however.
I’m trying to solve a “no CEL, cranks, no start“ issue, and while tracking down grounds found two dangling connectors on the wall of the driver’s side panel under the fuse box. The one with the yellow circle is a two-wire connector with black and red wires. The one with the red circle is a 6...
This is the only remaining complete locker sub-harness for the 80 series from Toyota.
This will fit all of the 1993-1997 80 Series trucks. This part is barely still available from Toyota. Also integrates the locker breather tube as well.
Hope this information helps folks.
It is...
Hi everybody,
I bought my LC80 without a radio and it is getting time to do something about it.
I found a bunch of connectors and since I am not that technical I hope you guys can help me. Besides connectors I have some receivers (I guess) on my windshield. Any ideas?
The alternator finally failed on me a couple of days ago on my 2000 LC. I'm considering a 2003+ 130 amp upgrade, just in case I ever add some extra lights. I'm trying to put together a pigtail so I don't have to cut the factory wires. I found the four way connector for the new alternator but...
My doors have started locking themselves. I'm guessing it has something to do with this mess:
Can anyone recommend best fix these horrible mid-wire splices? Yes, I'm happy to remove the crappy aftermarket alarm, but I don't want a bunch of mangled wires hanging around.
Also, yes that's kitty...