coil

Just downgraded my suspension to stock to fit in my garage. These springs were installed by Torfab outside Seattle in 2017. I bought the car shortly after and put about 40k of highway and light forest service roads on them. All Washington, California and Oregon. They add right about two inches...

I bought the dobinson lift with the C59-223V for rear coils and C59-222V for front coils. anyways during the uninstall of the old coils, i asked my son to unwrap the new ones. while doing so he tore the tags off. Is there any way to identify which coil goes on divers side vs passenger? Pics...

First off, I have been following this amazing forum for some time now and wanted to thank so many of you for your knowledge and willingness to help people. With that I thought maybe I could join and maybe I could help someone someday as well. Since I am here, I might as well ask a question...

Needing some replacements for the old 3FE. As you all probably know, non-OEM don't do **** for these rigs. Cheers!

My wife has a 2002 Rav4, 2.4L 2AZ-FE It's been in and out of the local mechanic shop. It has repeatedly had misfire issues. Intermittent stumbling, stalling, down on power Mechanics have changed coil packs numerous times. Replaced the cats twice (once under warranty). Replaced the ECU. Had a...

Does anyone know where I can find a 15mm front spacer in the US? I've got 850 OME coils up front. I see 10mm is available via OME and thats what I'll go with if I can't find a 15mm. It seems all the 15mm are for the rear. Any help will be greatly appreciated.

1976 FJ40. A friend of mine just purchased an FJ and is very pleased with the car and although it ran fine at first, it soon (within a day) developed an issue staying running. It will start perfectly but when you release the ignition switch to the Run position, it dies. I can run a jumper...

Hey everyone I have had slight rattle coming from the front end that I have deduced down to the bump stop that is in the coil. How do I tighten this up? Thanks in advance, -Josh

https://vintageteqparts.com/collections/everything-else-hardware-fsms-shop-manuals-special-teq-stuff/products/oem-japan-spec-parts-fj62-fj80-3fe-ignition-distributor-and-coil-connectors-male-female-terminals-seals-repair-restore-refresh-kit . ( NEW PRODUCT RELEASE ) OEM Japan FJ62 / FJ80...

$100, local pick-up. Will trade for OME 2863. Thanks!

1999 Land Cruiser ignition coil lists for $156 and a 1999 LX 470 coil lists for $121. Both different part numbers, but the engines are obviously the same. I bought a Denso from Rock Auto for $51, so I didn't buy either of these OEMs, but can anyone speculate why there are 2 different part...

I think it may be time to update my Ignition/Coil unit and just need some guidance on what would be the best option for a non-brainer swap with minimal headaches. Was hoping someone can chime in here and help guide me. And yes, "if it aint broke" does apply here, but I am updating everything...

Hi all. Getting ready to replace my rear coils as the stock ones have 213k miles on them and they’re tired. I’m thinking about the dobinsons c59-223v. They’re progressive and only give ~1.5” of lift which is fine. I have no extra weight (bumpers, etc) and don’t plan on adding any. I wasn’t...

Hello. Recently I got the notion to check the primary and secondary resistance of the ignition coil on my 1984 FJ60. It was out of spec. So, I ordered a new one. But when I checked this new coil’s resistance, I found it too was not in spec. It’s an Intermotor coil… nothing fancy but surely it...

Looking for a near perfect condition OEM NipponDenso Ignition Coil either 90919-02077 or 90919-02069. I know these are NLA but someone has one on their parts shelf... The coil was used from 1975-1977.

I have a stock distributer and button, with stock cap and NGK wires with stock coil off my 1985 fj60. All in working condition when I remove them 5 years ago to run the TPI Firecracker kit. I’m located in Ocoee Florida shipping is flat rate either $17 or $20 USPS and $300 for the parts.

My current plan is to upgrade the suspension in a modest fashion. It is currently stock, but I want to match the springs to the load. I am planning to pull an overlanding trailer with tongue weight of 400#. However, that will not be full time. So how do I best compensate for this? The...

Just started a complete suspension upgrade on my LJ73. Everything was pretty much worn out when I got it few weeks ago. I replaced the steering dampener with OME and replaced completely dead front shocks today with OME NitroSports. Amazing difference in front end firmness already and half of the...

Located in Houston, TX OME 2865 rear coil springs for LC 100 series $50 (just need them out of my garage) Shipping is probably around $80 within the lower 48 Used for 5K miles

Hey folks. Been lurking for a while and now have myself an 80 - an HDJ81. It needs some new suspension parts. In the rear it's got Dobinsons C59-243 linear coils which are listed as standard height with what appears to be OEM shocks. The front end is stock standard as far as I can tell. Once...