Was going to replace the clutch master cylinder on my '83 FJ60, and got about 3 minutes into it before getting stuck. The clutch pedal pin won't come out of the pedal. It's not rusted, it's not frozen, everything very clean, I can actually turn it in place with almost no resistance. But, it...
I have a new build with a new OEM clutch master and secondary cylinders, stainless hard line, and braided flex line. There are no leaks.
I've bled the system a few times following everything I know, plus the Haynes manual, until there there are absolutely no bubbles - just clean fluid. The...
I am finally finishing up with a 5 year frame off on my 72 FJ40. I swapped to a 4 speed (kept 3 speed xfer) from a 77 with a kit from @marksoffroad. My issue now is the clutch slave cylinder is not returning all way back and the clutch is slipping. I have doubled up the spring to the fork an...
Sold. 80 series manual clutch pedal. Perfect for manual trans swap. $200 plus shipping.
Sold: 80 series early style center console in gray. $200 plus shipping.
Hello everyone,
I have had my 74 FJ for a few months now. Since I purchased it I have been dealing with a very stiff clutch pedal. It was barely driven for a year or two before I purchased it so I hoped it would loosen up after driving it a while. That hasnt happened so Im wondering if there...
Hey Guys,
Update:
Pedals sold!
Center console reserved.
Time to clean up a bit because I hopefully won't need multiple sets for possible future manual conversions. So it's better to let someone else enjoy part of the manual converison fun as wel 😜
The parts are in decent shape for their age...
Hello all,
In the process on getting my om606 swap finished up and I'm in need of a clutch pedal assembly for a LHD 1991 FJ80. Please Pm if you have one
Hey yall,
I am going to start this off by saying I am not a mechanic and most of what I do know is based of looking stuff up on the internet to try and figure things out. I have a manual 91 toyota pickup with a 22re engine thats got a recurring problem: my stick keeps getting stuck while im...
The Clutch of my KZJ71 is hard & after some drive, the paddle does not come back & I have to pull it with my foot toe.
Replaced Master Cylinder & Actuator. No luck.
Also removed the Spring at Clutch Paddle but same problem.
Gear shifting is OK.
Rig has done 180000 Kms.
So, first of all: this is a x-post from /r/LandCruisers. I hope this is allowed.
As the title says, my LJ70 has a really weird problem with the clutch. It is as if the clutch is inactive in some way. When I push down the clutch pedal, it moves very freely with no resistance at all, until an...
Hi,
I have a '89 cruiser with a H55F conversion. Been driving the truck for about 2 months and everything has been great until now. My clutch pedal feels rough, gritty upon depressing while the truck is running. The pedal feels perfectly smooth when the truck is off.
I don't see any leaks...