carb

What you see is what I have. No wiring. Was going to use it in my '70 build but decided that I don't need rear heat. Want to sell everything together. $125 shipped CONUS.

Thick carb spacer. 75.00 before shipping. Thinner spare for comparison. Not included but can be purchased.

Used, free. Works great. Just had a nice new-ish spare and decided to install that. Just pay shipping or pickup in Boise/Caldwell, ID.

$150 plus shipping

As the title states, I am looking to trade (only) my standard downey/marks header for a ca spec downey/marks header. Preferably in socal or surrounding areas. Offer is still vaild if this post is up! Example:

I know this has been answered, but I cannot find it. A 69 cruiser has a 4 wheel disc brake upgrade with a booster and master cylinder. The booster is extended beyond the support on the firewall. The new carb has a secondary that competes for the same space as the end of the master. The...

Just picked up a '77. There is no air cleaner on it. Want to pick one up. I'm guessing this isn't the stock carb. Or if it is, it's finish has held up remarkably well over the years. I can't find a model number, only the serial. Is there somewhere special I can order an air cleaner for...

Looking for a 2F carb hat or ideally a complete non us air intake assembly from fender to carb. Thanks,

I just posted for advice on upgrading to a factory vacuum advance distributor and it got me thinking.....I have another question about my 1973 F155. Mark rebuilt the factory 1973 Aisin and did a great job....it runs super nice. My only question is that when it sits for a while (anything over a...

Hi dudes, Is the city racer carb pretty plug and play? Opened her up and seems identicle, but wondering if anyone who’s bought this has some insight into the measurements and settings being roughly the same as the stock carb? (I also noticed the FCS is a different type than what’s on my...

These all came off a running 1985 2F engine (FJ60) that thru a rod. I was going to rebuild the engine, but the block was cracked... Buyer pays shipping CONUS only: EGR system -- Various, LMK what parts you want and we can work out a price EGR vacuum pipes and all the rest — $100 EGR Cooler w/...

Hi guys, wondering if you can help me identify what this noise is that I am hearing when I shut off my 1985 fj60. I recently had a brake job done and after driving home I noticed the carb cooling fan is working for the first time under my ownership. Only thing is there is a pretty noticeable...

D40 Carb I do not need. $80 plus shipping

I have a 1978 FJ40 which was imported from Columbia and has carb issues. The existing carb is an Aisan, it looks like it may be the original, has the 'rod' linkage and has a vacuum operated choke breaker. I have read quite a few discussions on this site about the pro's and con's of Aisan...

Manifold not included! Downey air cleaner and holley carburetor As per photos $300.00 shipped lower 48 Thanks

Complete smog set up from a 1984 fj60. All worked when removed. $300 includes shipping within lower 48 states.

Believe this is year specific? to a 1973. 100$ shipped to lower 48

Hey guys - finally went ahead a did a “rebuild” on my 2f carb. The float valve was sticking amongst other things. I put carb back on and similar symptoms - idle fuel pulling through Venturi. I read in the forum to blow out the idle circuit, likely blocked (with compressed air and carb cleaner)...

Hello I recently purchased a 2f out of 1987 fj60 with newer carb and smog stuff. I also have a f carb from original engine 1970 that will probley need a rebuild. Should I D smog newer carb but also have figure out going from cable 1970 pedal to mechanical carb.

Hey guys My carb in leaking bad even anfter rebuild and I need a loaner/ rental/purchasable carb that works to get me until I can rebuild my stock one. It’s my only rig and I’m out of time with ship space. Is there anyone in the mountain west selling one or better yet renting jt out? I’ve got an...