bj74

Looking for a replacement vacuum pump for my 88 BJ74. I believe the assembly # is 29300-56070, discontinued. Also would be interested in a rebuild kit if one exists. A new one would be preferred but one in good shape would be considered. Thanks.

https://seattle.craigslist.org/see/cto/d/seattle-1993-land-cruiser-lj77-lx-door/7706321240.html Not mine.

Hello everyone, I’ve decided to sell my GRJ71 project, there have been several 79 pickup projects that I helped source the bodies for here on mud, but this is the only 71 body I received and being as unique as it is I thought would save it for myself….unfortunately I’ve realized this is too...

Anyone heading north with an empty trailer. Buying a bj74 and need it brought up. Thanks

Hi all, Just got this JDM 1987 BJ74 with 24v system. I got it with a newer non OEM but similar alternator installed that had fried one of the wires because as it turns out, it was not one with an internal regulator like the stock 27040-56050 one. I have another one of these aftermarket...

1994 Troopy, LHD, 4.5 FC gas engine, 5 spd Runs great, shifts ok, new clutch, 326K km, originally from Turkey Winch, roof rack, locking differentials Daily driver, new clutch, front drive shaft, shocks, steering damper and tires Nice solid, not perfect, title in Mass, originally from Turkey...

Hey there y’all, I have a project 1987 BJ74 with the factory 13B-T turbodiesel engine available for purchase. It has just over 166,000 kilometers on it. Needs some rust repair on a few small spots on the body and probably a windshield frame. Engine runs great, starts right up. Vehicle drives...

This is not my car, just saw the marketplace listing and saw that it hasn’t been posted on mud. Log into Facebook - https://www.facebook.com/marketplace/item/1670659370077428/?mibextid=cf90P8 I live an hour away from it, if anyone is seriously considering buying it I can go drive out and...

First day into paint shop

Looking to trade my aftermarket side mirrors and taillights for an oem ones. Pm me Pair of taillights--125 Side mirrors with led provision for turn signals--$150

Looking to buy oem tail lights for bj74. Or trade my red/white to oem ones. Also pair of oem side mirrors bj74, mine has led insert for turn signals. Pm me

This is my third attempt to sell a LC on IH8MUD. THE 1st 2 was a 1996 LX and later a 2013 200 series LC, but both were unsuccessful. Still have the LX and planning on taking it to the Cruiser Crawl in OCT. The 200 sold to a guy in Memphis at about the deal of the decade: For Sale - 2013 LC...

Not mine https://bringatrailer.com/listing/1995-toyota-land-cruiser-fzj73-9/ Listed here a few months ago for 42K

Looking to replace my red/white led tail lights off my bj74 Also pair oem side mirrors

$30,000.00 CDN, 174000kms, 13BT, 5speed H55f, Cable lockers. Power windows, Power door locks, part time front hubs, A/C to repair. Spare parts: alternator, hubs, calipers, pads, bearings, inner axle shafts.

Have a 13BT with an upgraded CT26 w/ Garrett 60-1 wheel. Biggest issue is it’s slow to boost. Not intercooled yet not sure if that would help, but I started to play with the timing some today but I’m totally new to messing with Injection Pump timing. I moved the whole pump about a 1mm advanced...

im in need of a kickdown cable emailed a few company that make custom throttle cables and the were not to sure if they could help me. has any one used the hz to a442f kickdown cable "35520-60060" in its replacement the 3f to a442f is a bit to short and will not work if some one has one in the...

Will someone with a 74 two door take a couple measurements? -Roof top front to back, and side to side. -Rear floor from front of rear seat cushion to back of front seat. -Rear floor from back of rear seat to back door. -Rear floor from back door to back of front seat. Please and thank you!

Really need some help here, Been chasing this problem for about a month. When I turn the key off, the truck drops down to about 200rpm but will never shut off. I have replaced the VSV, all the vacuum lines, the Venturi, and made new gaskets for the Venturi and intake heater. The vacuum pressure...

Hey there, this is my first post in this forum. I've found myself here several times when looking for answers to my BJ74 questions so I figured I should just join. I'm so grateful for the wealth of info and knowledge in this community. In September last year I finally bought a BJ74! A short...