I'm attempting to fit some Recaro seats into my Troopy. I ordered some adapters from Planted, and some universal recaro rails.
The rails bolt to the seat, the rails also interface with the Planted seat adapter. However, the seat adapter does not match my bolt pattern on the vehicle.
I have...
I have the Beat Sonic CP/AA adapter in my '16 LX and for whatever reason it/my phone can't seem to decide wether it wants to play the audio through the AUX source, like it should, or to play through bluetooth. I tried turning off bluetooth audio for the phone through the car settings and that...
Working on an old school SM420 Advance Adapters 2 1/4” plate adapter to a 3 speed case. Casting number is 1113. Transmission uses a replacement main shaft that has the LC 10 spline output. (Current one made by AA uses a longer adapter and an “extender” shaft that slides over the original SM420...
So I bought a refurbished OEM steering wheel but never have been a fan of a 20+ yo airbag in my face as I drive.
So that lead me down a rabbit hole while down with a bad pain and on pain killers.
I started off with buying an adapter that worked but lost cruise control. I have never really...
Hey everyone, I'm looking to see if anyone here has or knows of someone looking to get rid of an sm420 to LC 3sp adapter plate. I'm striking out pretty hard on locating one because apparently they have fallen out of demand. If anyone has any leads, I'd greatly appreciate it.
Thanks
Mike D
Hey everyone, I'm looking to see if anyone here has or knows of someone looking to get rid of an sm420 to LC 3sp adapter plate. I'm striking out pretty hard on locating one because apparently they have fallen out of demand. If anyone has any leads, I'd greatly appreciate it.
Thanks
Mike D
I have a Holley 350 2bbl w/chimney kit installed that was recently factory refurbished from Holley. It also comes with a 2F adapter and all hardware for the conversion. I bought it from a friend to run on my FJ40 when he pulled it off of his FJ40. It ran well and did well off road, but he went...
Hello all,
Us 13-15 landcruiser people don't have any really good bolt-in LED fog lamp options due to toyota using a larger pattern for their mounting brackets. The same year LX has a compact assembly that is shared with other more common toyotas and as a result the LED manufacturers offer...
I’ve got a ‘64 40 series, that was running ‘76 40 axles.
I have just swapped in a ‘05 factory disc brake 14b (aam 10.5”) and need an adapter for the brake lines from the Toyota hard line at the frame, to the soft line at the axle (to the ‘T’)
Looks like I need a an adapter with a female end...
I’ve got a ‘64 40 series, that was running ‘76 40 axles.
I have just swapped in a ‘05 factory disc brake 14b (aam 10.5”) and need an adapter for the brake lines from the Toyota hard line at the frame, to the soft line at the axle (to the ‘T’)
Looks like I need a an adapter with a female end...
Hi,
I bought an aux adapter that is supposed to plug in instead of 6-cd changer, socket fits, but it doesn't work because it turns out that it is for newer models from 2003 and mine is 2001 LC anniversary, which has audio unit from lx 470 (Europe). Maybe someone could help me rewire this adapter...
Can someone help me and explain what is its purpose? It is an adapter threaded onto Speed cable (I think) to the transfer case . Engine and transmission has been swapped, not sure if this is needed? Yo be connected?
L.C now has a 5.3 with the 4l60e transmission
This is the adapter by Jerry Nichols of Colorado Offroad Express and built by Advance Adapters. Will bolt a NP203 low gearbox to a TLC 19 spline transfer case. Been sitting in the garage for longer than I care to say. Moving out of country and so I'll never use it. Hope someone else can.
$150 +...
I have a left over adapter plate from my diesel conversion. I only have the adapter plate, none of the rotating pieces.
It is 1" thick and anodized black. This part would be great for someone looking to hook a Cummins R2.8 to anything found behind a 1FZ engine.
Located in Greenville Texas...
I have a used Mark’s adapter I will let go for $600 plus shipping. I can throw in a set of my motor mounts at 50% off as well ($130) which work really well with this adapter’s engine placement.
The only parts included are the adapter housing, spud shaft, and throwout bearing hub...
I bought a set of these seats which I believe are from a more recent hzj76(picture is from cruiserparts) . I have a 1990 hzj77 with suspension seats. The rear seat installed perfectly with zero issues but the front two have some problems I need to work around. The track mounts are vertically...