So discovered that the CDL is on the same fuse as the gauge lights (please correct me if I"m wrong). I replaced the fuse and as soon as I turn on the gauge lights with the cdl not engauged fuse blows hardcore. If the CDL is engauged and the lights are turned on or off the fuse doesn't seem to blow (I wasn't able to try all combinations, ran out of 15amp fuses).
The guy who installed my radio used the CDL wires as the pwr, ground, and remote draw. That's what the 3 brown clip things in the pic are. So I disconncected the headunit connections and still same problem. The presence of the wire split shouldn't effect the draw as long as I don't have anything pluged into them. Oh and by the way, I still don't know if the Switch itself works. Could it be a bad switch that is causing a short?
And of course the fuses who sacraficed for the cause.
Big thanks in advance
The guy who installed my radio used the CDL wires as the pwr, ground, and remote draw. That's what the 3 brown clip things in the pic are. So I disconncected the headunit connections and still same problem. The presence of the wire split shouldn't effect the draw as long as I don't have anything pluged into them. Oh and by the way, I still don't know if the Switch itself works. Could it be a bad switch that is causing a short?
And of course the fuses who sacraficed for the cause.
Big thanks in advance